Non Topical/Unaligned Session Papers
Session 17 - Colloidal Dispersions I
Chair: Michael A. Bevan
Vice Chair: Steven P. Wrenn
17a Rupture of Surfactant Containing Latex Films during Drying
17b Mechanics of Thermal Gels
17c Enhanced Aggregation of Alginate-Coated Hematite Nanoparticles
17d Aqueous-Core Capsules Via Direct Interfacial Polymerization
17e Structure and Dynamics of Biphasic Colloidal Suspensions
17f The Effect of Nanoparticles on the Structure of Clay Suspensions
17g Synthesis of
Organophilic Laponite Nanoparticles and Their Assembly
into Birefringent Organogels
Session 18 - Emulsions and Foams
Chair: Ted Lee
Vice Chair: Sekhar Sundaram
18a A
18b Structure of Microparticles and Nanoparticles in Solid-Stabilized Emulsions
18c Evolution of Liquid Holdup Profile Due to Syneresis in Protein Stabilized Foams
18d Asphaltene-Stabilized Emulsion Characterization by Small Angle (Sans) and Ultra Small Angle Neutron Scattering (Usans)
18e A Molecular Dynamics Study of the Coalescence Mechanism of Nanometer-Sized Water Clusters with Adsorbed Naphthenic Acids
18f Foam Formation in a Continuous Mechanical Whipper
18g Modeling a Trichlorofluoromethane Hydrate Formation in a W/O Emulsion Submitted to Steady Cooling
Session 22 - Fundamental Research in Transport Processes
Chair: Joel L. Plawsky
22a On the Process of Electrohydrodynamic Atomization under the Influence of Two Independent Electrical Field Sources
22b The Adiabatic-Core Case in Electrokinetic-Based Coating Processes
22c Effect of Free Convection on Melting in Cylindrical Containers
22d Heat
Transfer in Plane Couette Flow Using Coupled Direct Simulations
and Lagrangian Methods
22e The Effect of Transport on Reactions in Homogeneous Tubular Flow
22f Pulsatile
Flow and Gas Transport over an Array of Cylinders: Gas Transfer
Model inside an Artificial Lung
22g 3d Simulation of the Fcc Particle Contact with Oil Droplet at High Temperatures
22h Diffusion Equation for Interacting Particles
22i Nonequilibrium Modeling of Heat and Mass Transfer with Partial Condensation in a Tube-Type Interface for Heat Integrated Distillation Column
22j A CFD Model for the Washing Zone in Coker Fractionators
22k Reducing the Order of Current-Potential Distribution Models
Polymeric Hollow Fiber Heat Exchangers (Phfhes): a New Type of Compact Heat Exchanger for Lower Temperature Applications
Session 28 - Mathematical and Computational Techniques for Solvent Mediated Interactions
Chair: Venkat Ganesan
Vice Chair: Jianzhong Wu
28a Hydrophobic Hydration at Small and Large Lengthscales: Understanding, Manipulating and Predicting the Crossover
28b Field Theoretic Study of Surface-Modified Nanoparticles in Block Copolymer Melts
28c Interactions between Nanoparticles in Solutions of Polymers
28d Colloidal Stabilisation by Nano-Particle Halos
28e Nonlinear Screening Theory for Charged Colloids
28f Molecular-Dynamics Simulation of the Solvation of Colloidal Nanoparticles
28g Solvation Forces Due to Multiply Attachable Copolymers: a Density Functional Approach
28h Coarse-Grained Potentials from Widom's Particle Insertion Method
28i Solvation Model Based on Order Parameters and Fast Sampling Method for the Calculation of the Solvation Free Energies of the Peptides
28j Investigation of the Role of Geometry and Fluid Structure in the Description of Depletion Forces Via Scaled Particle Theory-Based Integral Equations for Hard Sphere Fluids
Session 33 - Novel Flows
Chair: Susan J. Muller
Vice Chair: Michael Graham
33a Micro- and Nano-Scale Flow Instabilities during the Approach and Detachment of Liquid and Polymer Surfaces
33b Rheology and Non-Newtonian Fluid Mechanics of Complex Interfaces
33c Interfacial Flows Driven by Redox-Active Amphiphiles
33d Molecular Simulations of Surfactant-Assisted Spreading
Keeping Lung Surfactant Where It Belongs
Session 42 - Thermodynamics at Nanoscale
Chair: Mikhail A Anisimov
Vice Chair: You-Yeon Won
42a Self-Assembly of Block Copolymers in a Liquid Crystal Solvent: Consequences of Switchable Quality
42b Surfactant Design for Hydrofluoroalkane-Based Pmdis: a Microscopic Investigation Using Chemical Force Microscopy
42c Metastable Mesoscopic Clusters in Low-Ionic Strength Protein Solutions
42d A Simulation Study of Capillary Condensation and Freezing of Krypton within Realistic Models of MCM-41 Materials
42e A Macrothermodynamical Approach to the Limit of Reversible Capillary Condensation
42f Interfacial Properties and Structure of Polymer Blends and Solutions from Interfacial-Saft (Isaft) Density Functional Theory
42g On the Stability of Ordered Ultrathin Organic Films: Dewetting and Ostwald Ripening
Session 43 - Thermophysical Properties of Biological Systems I
Chair: Paul R Van Tassel
Vice Chair: Richard Elliott
43a Proteins in
Inhomogeneous Environments: Answers from Advanced Monte
Carlo Simulations
43b Molecular Recognition in Model DNA Microarrays: a Computer Simulation Study
43c Spicying-up Simulations of Phospholipid Bilayers
43d The Polymerization of Actin: Structural Changes from Small Angle Neutron Scattering
43e Measurement of Solubility of Ibuprofen and Flurbiprofen Enantiomers in Carbon Dioxide Mobile Phase with Iso-Propanol and Sec-Butanol Employed as a Modifier
43f Thermodynamic Characterization of the Binding between Plasmodium Falciparum Msp-19 Ligand to Erythrocyte Receptor Band 3 Loop 5abc Using Biosensor Technology
43g Polymer Physics of the Cytoskeleton
Surface
Tension Effect on Lipid Mobility and Transmembrane Channel
Stability in a Model Membrane
Session 45 - Transport and Reaction in Heterogeneous and Porous Materials
Chair: Karsten E Thompson
Vice Chair: Kishore Mohanty
45a Numerical Modeling of Combustion Stability in Emergency Oxygen Generators
45b Investigation of Fate and Transport of Organic Contaminants in Soil Columns Packed with Different Soil Textures
45c Simulation of Liquid Flow Distribution in Trickle-Bed Reactors
45d The Behavior of Porous Rotating Disk Electrodes
45e Two-Scale
Continuum Model for Simulation of Wormhole Formation in
Carbonate Acidization
45f A Numerical Solution for the Anomalous Sedimentation of a Small Brownian Sphere in a Vertical Cylinder of Periodically Varying Radius
45g Visualizing a Macromolecular Phase Transition by Macroscopic Reaction-Diffusion Patterns
45h Simulation of Imbibition Experiments with Wettability Altering Surfactants
Session 55 -
Colloidal Dispersions II
Chair: Michael A.
Bevan
Vice Chair: Steven P. Wrenn
55a Hydrodynamic Interactions in Colloidal Dispersions of Conducting Rods under Induced-Charge Electrophoresis
55b Self-Assembly of Patchy Particles into Diamond Structures through Molecular Mimicry
55c Equilibrium
and Constrained-Equilibrium States in Stratified Particle-Stabilized Thin
Liquid Film
55d Density
Fluctuations, Interparticle Attractions, and the Dynamics of Simple and
Complex Fluids
55e Connecting
the Wetting and Rheological Behaviors of Pdms-Grafted Nanospheres in
Pdms Melts
55f Engineering DNA-Mediated Colloidal Self-Assembly: Preparing Sterically Stable Particles and Assembling Them into Ordered Crystal Structures
55g Shear Thickening in Polymer Stabilized Colloidal Dispersions
Session 56 - Computational Modeling of Surfaces and Surface Phenomena
Chair: Gyeong S. Hwang
Vice Chair: Aravind R. Asthagiri
56a Experimental and Computational Probing of the Transition States to Surface Reactions
56b First-Principles Studies of Amino Acid Adsorption on Chiral Mineral Surfaces
56c Accelerated Molecular Dynamics Simulation of Thermal Desorption
56d Surface Smoothening Mechanism of Plasma-Deposited Amorphous Silicon Thin Films
56e A Simple Chemical View of Relaxations at (110) Surfaces of Rutile Structure-Type Oxides
56f Surface Structure and Reactivity of Clean and Hydrated Α-Fe2O3
Session 69 - Interfacial Flows I
Chair: Osman Basaran
Vice Chair: Patrick K Notz
69a Hydrodynamic Entrainment of Viscous Fluids
69b Observations of Tipstreaming in a Flow Focusing Microfluidic Device
69c Stability of Liquid Bridges Subject to Shearing
69d Faraday Instability in a Surface-Frozen Liquid
69e Modeling of Non-Isothermal Jets in Polymer Melt Electrospinning
69f Formation of a Nanoliter-Sized Droplet by Ac Electric Field and Resonant Oscillation
69g Interfacial Electro-Kinetic Phenomena Due to Plasma Polarization
69h Magnetically Driven Surface Flows in Ferrofluids
69i Accumulation of Particles at an Advancing Meniscus: Meniscus Effects in a Tube in the Presence of Gravity
69j Mechanical Properties of Particle-Laden Fluid Interfaces
Session 70 - Interfacial Phenomena in Environmental Systems
Chair: Sekhar Sundaram
Vice Chair: Sotira Yiacoumi
70a Force Interactions Profiles between Cryptosporidium Parvum Oocysts and Silica Surfaces
70b Stability and Coalescence of Emulsion Droplets in a Constricted Tube
70c Sorption and Desorption Characteristics of Phenanthrene in Nano-Confined Polystyrene
70d Mass Transfer Characteristics of an Airlift Contactor with a Semipermeable Membrane, Containing Aqueous Hydrocarbon Solution
70e Removal of Arsenic (V) from Water Using Coated Magnetic Particles
70f Biofiltration
of Chlorinated Volatile Organic Compounds: Laboratory-Scale and
Pilot-Scale Studies
70g Wind-Driven Surficial Oxygen Transfer into Treatment Lagoons and Implications on Dinitrogen Emission
70h Application of L3 Sponge Phase in Preconcentration of Polycyclic Aromatic Hydrocarbons
Session 71 - Mathematical Modeling of Transport Processes
Chair: Norman W Loney
Vice Chair: Nivedita R. Gupta
71a Prediction of Flow and Size Distribution in Emulsion Polymerization Processes
71b Transport of Ultrafine Particles in Bifurcations
71c Prediction
of Pressure Drop in Gas Cylinders with Vapor Extraction at High
and Low Flow Rates
71d CFD Simulations of Thermal Dispersion in Packed Beds
71e Transient Thermal Response of a Nanoscale Multilayered Film
71f Conduction-Cooling of a High-Temperature Superconducting Cable
71g Non-Isothermal Modeling of Ethane Thermal Cracker
71h Modeling of Falling Film Absorber
71i Multiscale Modeling of Transport in Fractured Porous Materials
71j Mass Transfer and Separation of Species in Oscillating Flows with a Wavy-Walled Boundary: an Analytical Study
71k A Generalized Mathematical Model for Sustainability
Regime Change in Simultaneous Wave Diffusion and Reaction
Session 73 - Nanoscale Systems: Water in Inhomogeneous Environments
Chair: Jeffrey R. Errington
Vice Chair: Bernhardt L. Trout
73a The Properties of Small Water Clusters from Isothermal Nucleation Rate Measurements
73b Pressure Driven Flow and Hydrogen Bonded Ordering of Liquids inside Carbon Nanotubes
73c Hydrate Formation and Dissociation Processes Investigated by NMR
73d Computational
Study of Structure and Dynamics of Water near Surfaces
with Controlled Hydrophobicity
73e Spatial
Distribution and Aggregation of Water in a Reversed-Phase Liquid
Chromatography System
73f A General
Orientational Order Parameter and Its Applications to Pure Water
and Ion-Water Systems
73g Water Condensation in Hydrophobic Nanopores
73h Computational Study of Low Density Water Formation in Hydrophobic Nanopores of Silicalite by Means of Estimating Adsorption Isotherms with Different Water Models
Session 77 - Reactions in Near and Supercritical Fluids II
Chair: Aaron M. Scurto
Vice Chair: Wei-Yin Chen
77a Oleic Acid Oxidation in Supercritical Carbon Dioxide
77b Investigations of Structure-Activity Relationships for Cobalt Oxygen Carriers as Radical Catalysts for Catalytic Oxidations in CO2-Expanded Liquids
77c Biocatalysis
and Co2-Induced Separation and Recycle in Organic-Aqueous
Tunable Solvents (Oats)
77d Base-Catalyzed Reactions in Nh3-Enriched near-Critical Water
77e Detailed Chemical Kinetic Modeling of Ammonia Oxidation in Supercritical Water
77f Kinetics of
Fructose Decomposition Catalyzed by Organic Acids in High
Temperature Liquid Water
77g High-Temperature Water; Specific or General Acid/Base Catalyst?
Session 87 - Thermodynamic Properties and Phase Behavior: Part I
Chair: Clare McCabe
Vice Chair: J. Il Siepmann
87a Tracing the Critical Locus for Binary Fluid Mixtures Using Molecular Simulations
87b Cluster Integral Calculations Via Mayer-Sampling Molecular Simulation: Higher-Order Virial Coefficients, Thermodynamic Properties, and Molecular Clustering
87c Computing Vapor-Liquid Coexistence Curves for Metals
87d Phase Behavior of Elemental Aluminum Using Monte Carlo Simulations
87e Free Energy of the Solid C60 Orientational Order-Disorder Transition
87f Experimental Determination and Predicted Solubilities of Thiophene + N-Nonane, or + N-Decane in Dense and Supercritical CO2
87g High-Accuracy Density Measurements for a Natural Gas Mixture
87h Computing Solid-Fluid Coexistence for Molecular Systems Using a Pseudo-Supercritical Path Sampling Method
87i Crossover Hr-Saft Equation of State for Fluid Mixtures: Application to Binary Mixtures of Carbon Dioxide, Water, and Methanol
Session 88 - Turbulent Flows
Chair:
Vice Chair: Kostas Kontomaris
88a Large-Eddy Simulations of Turbulent Flows in Complex Confinements with Applications in Chemical Engineering
88b Large-Eddy Simulation of Turbulent Reactive Flows
88c Simultaneous Turbulent Velocity and Concentration Measurements in a Rectangular Reactor
88d A Numerical Revisit on Mass Transfer Experiments at a Free Surface in a Turbulent Open Channel Flow
88e An a Priori Analysis of Mixture-Fraction Based Models in Isotropic Turbulence
88f Direct Numerical Simulation of Homogeneous Turbulent Shear Flow with Polymer
88g Direct
Numerical Simulations of Viscoelastic Turbulent Channel Flows at High
Drag Reduction
88h Universal Scaling for Polymer Degradation in Turbulent Flows
88i Temperature Gap for Surfactant Drag Reduction
Session 109 - Applications of Nanostructured Fluids
Chair: Raj Wallajapet
Vice Chair: Paschalis Alexandridis
109a Structure - Property Relationships in Amphiphilic Block Copolymer Solutions
109b The Ternary Phase Diagram of a Mixed Cationic / Glycoside Surfactant / Water System and Its Use for Predictive Synthesis of Mesoporous Materials
109c Preparation and Characterization of Nanoporous Materials from Microemulsions Formulated with a Biocompatible Surfactant
109d Atr-Ftir Study of Adsorption Kinetics and Structural Arrangement of an Anionic Fluorinated Surfactant at Germanium/Water Interface
109e Investigation of Thermal Transport in Nano-Fluids Using Forced Rayleigh Scattering
109f The Thermal Conductivity of Nanofluids Containing Al2o3 Nanoparticles
109g Enhancement of Thermal Transport in Water and Ethylene Glycol Using Al2o3 Nanoparticles
Session 123 - Interfacial Engineering
Chair: Paul E. Laibinis
Vice Chair: Guangzhao Mao
123a New Protocols for Preparing Dipalmitoylphosphatidylcholine Dispersions and Controlling Surface Tension and Competitive Adsorption with Albumin at the Air/Aqueous Interface
123b Interfacial Engineering of Lipid Nano-Patterns for Controlled Nucleation of Aspirin
123c Assessing and Improving the Stability of Organic Monolayer Coatings
123d Polymer
Brushes with High Protein-Binding Capacity Based on Poly
(Dimethylamino Ethylmethacrylate)
123e Interfacial Engineering by Surface-Initiated Polymerization and Subsequent Modification
123f Reversible Self-Propelled Droplet Movement: a New Driving Mechanism
123g Kinetics of Reactive Spreading of Thiols
Session 124 - Interfacial Flows II
Chair: Osman Basaran
Vice Chair: Patrick K. Notz
124a Boundary Integral Simulations of Droplet Coalescence
124b Weak Viscous Oscillations and Collapse of Elongated Bubbles
124c Diffuse Interface Modeling of Droplet Impact
124d Numerical Analysis of the Dynamics of Stretching Viscoelastic Liquid Filaments Using the Micro-Macro Brownian Configurations Fields (Bcf) Method
124e Secondary Cohesion and Chemical Potential Models for Diffuse Interfaces
124f Capillary-Driven Flow in Supported Capillary Pipes
124g Dynamics of Thin Free Falling Viscous Films
124h Effect of
Insoluble Surfactant on the Selective Dip-Coating of Chemically
Micropatterned Surfaces
124i Effect of Surfactants on the Breakup of a Shear-Thinning Jet
124j Stalactite Growth as a Free-Boundary Problem
Session 129 - Non-Newtonian Flows
Chair: James P. Oberhauser
Vice Chair: Michael Mackay
129a Ergodicity-Breaking
and Conformational Hysteresis in Polymer Dynamics near
a Surface Stagnation Point
129b Dynamics of Chain Stiffening of a Semiflexible Bead-Rod Polymer
129c Development of Mesoscopic Models for Non-Newtonian Flow Calculations
129d Lattice Boltzmann Simulations of Non-Newtonian and Viscoelastic Flows
129e The Dynamics of a Model for Nematic Lcps in a Simple Shear Device: the Ericksen and Deborah Number Cascades
129f Electrophoretic Cells with Non-Newtonian Buffers and Joule Heating: an Efficient Approach for Velocity Profile Prediction
129g Generalized Hydraulic Calculation Method for Non-Newtonian Flow in Eccentric Annuli
129h Viscoelastic Nonlinear Traveling Waves and Drag Reduction in Plane Poiseuille Flow
129i An Exponential Mapping for the Conformation Tensor for Flow of Viscoelastic Fluids; Application in Turbulent Channels
129j A Numerical Study of Mixing in Drag-Reduced, Turbulent Flows of Polymer Solutions
Session 135 - Semiconductor Surface Chemistry
Chair: Katherine S. Ziemer
Vice Chair: Jason F. Weaver
135a Control of Defect Concentrations in Silicon through Surface Chemistry
135b Analysis of Chemical Reactions between Radical Growth Precursors Adsorbed on Plasma-Deposited Silicon Thin-Film Surfaces
135c Adatom-Pair
Chain Structures: Metastable Precursors to Island Formation
on the Ge-Si(100) 2xn Alloyed Surface
135d Organic
Functionalization of Semiconductors Using Amino Acids;
Quantum Resonance Coupling
135e Sic Surface
Preparation by Hydrogen Cleaning for High-Temperature, High-Power
Device Integration
135f Kinetics and Mechanism for Alkyl Monolayer Growth on Hydrogenated Si Surfaces
135g Growth of Sic on the Si (001) 1x1 Sufrace Using Monomethyl- and Dimethyl-Silanes
Session 138 - Thermodynamic Properties and Phase Behavior: Part II
Chair: J. Il Siepmann
138a The Solubility of N2 & O2 in Liquid CO2 near the Critical Point
138b Determination of Inorganic Salt Solubility by Headspace Gas Chromatography
138c Henry's Constants of Volatile Organic Compounds in Aqueous Electrolyte Solutions
138d Statistical Associating Fluid Theory Coupled with Restricted Primitive Model to Represent Aqueous Strong Electrolytes: Multiple-Salt Solutions
138e Generalized Cubic-Plus-Association Equation of State
138f Generalized Svrc-Qspr Predictions of Saturated Liquid and Vapor Viscosities
138g Molecular Modeling of Phase Behavior and Structural Properties for Acetone-Chloroform-Methanol Binary Mixtures
138h A New Method to Calculate the Melting Temperature of a Binary Mixture
138i Cosmo, Cosmo-Rs, Cosmospace, Cosmotherm, Cosmo-Sac, Cosmo-Rs(Ol), Etc.: Definitions, Differences and Comparisons
138j A Cosmo-Based Model for Predicting Properties of Pure and Mixture Systems
Session 139 - Thermophysical Properties of Biological Systems II
Chair: Thomas M. Truskett
Vice Chair: Ravindra S Kane
139a Simulations of Adsorption Properties for Charged Polypeptides on Hydrophobic Chromatography Surfaces
139b Role of Aggregation Conditions in Structure, Stability and Toxicity of Intermediates in the Beta Amyloid Fibril Formation Pathway
139c Deactivation
of Enzymes in Concentrated Salt Solutions: an Investigation of
Hofmeister Effects
139d Determination of the Effects of Carbohydrates on Protein Stability and Structure
139e Molecular Simulations of Multicomponent Bilayers. the Effect of Disaccharides, Cholesterol and Lipid Composition on Membrane Properties
139f Effect of Protein Crystal Size, Cooling Method and Soak Time in Cryoprotectant Solutions on Cryoprotection and X-Ray Data Quality
139g Interaction between Model Proteins and Charge-Nanopatterned Surfaces: a Novel Multicanonical Simulation Approach
139h Molecular Modeling of Cellulose Hydrolysis: the Hydrated Cel7a Linker Peptide
139i Investigating Molecular and Phase Stability of Protein Solutions by a Coarse-Grained Modeling Strategy
Session 140 - Transport Processes in Nanoscale Systems
Chair: Marc-Olivier Coppens
Vice Chair: Joel Plawsky
140a Multiscale Models for Diffusion-Controlled Selective Catalytic Oxidation in Nanopores
140b Atomistic
Simulation of Nanoporous Layered Double Hydroxide Materials and
Their Properties
140c Microscopic Mechanisms of Molecule Migration in Nanochannels
140d Modeling of Transport of Nanoparticles across a Lipid Bilayer
140e Anisotropic Thermal Transport Estimation in Semiconductor Thin Films Via Lattice Boltzmann Method
140f Ballistic Heat Transport in One-Dimensional and Quasi-One-Dimensional Nanostructures
140g Superheated Homogeneous and Heterogeneous Bubble Nucleation Rates Using Npt and NpZzT Molecular Dynamics: Effects of Surface Interactions
140h Transport of Gases through Nano Composites of Natural Rubber Latex Membranes
Session 141 - Water Soluble Polymers
Chair: Sandra Greer
Vice Chair: David A. Putnam
141a A Novel Evaporation Cell to Study Gradient-Driven Water Transport through Hydrogel Membranes with Zero External Mass-Transfer Resistance
141b Molecular-Based
Study of the Solvation Behavior of Short-Chain Poly-Electrolytes in Aqueous
Solutions. LI-Pss Versus LI-Pps
141c Fundamental Studies of Polymer Physical Entanglement Interactions with Monodisperse, Random-Coil Protein Polymers
141d Engineering High Oxygen Affinity Oxygen Carriers
141e Investigation of the Properties of Cellulose-Based Polymers in Aqueous Solution by Molecular Simulation
141f Effect of the Hydrophobic Helix Length and Side Chain Chemistry on Biomimicry in Peptoid Analogues of Lung Surfactant Protein C
141g Density Functional Theory for Polyelectrolytes near a Charged Surface
141h A Monte Carlo Study on Structural Properties of Dendrimer-Polymer Conjugates
Session 144 - Poster Session in Fluid Mechanics
Chair: Sachin Velankar
Vice Chair: Michael R. King
144a Turbulent Poiseuille-Couette Flow
144b Inertial Lag and Bessel Composite Function of the Third Order and First Kind Solution to the Dissolving Pill Problem
144c Reynolds Stress Closure for Strongly Swirling Flows
144d CFD Analysis of the Transient Flow in a Low-Oil Concentration Hydrocyclone
144e CFD Simulations of Flow in Fixed Beds of Cylindrical Particles
144f Dip-Coating of Chemically Micropatterned Surfaces in the Presence of Soluble Surfactant
144g Extended Operability Range for Casting by Single Roll Melt Spinning
144h Velocity and Torque Measurements of Ferrofluid in Spin-up Flow
144i Determination of Shear on Cells Grown in Culture Dishes on a Shaker Table Using Computational Fluid Dynamics
144j Microscale Heat Transfer and Fluid Flow in an Evaporating Moving Extended Meniscus
144k Development
of a Microfluidic Rheometer for Measuring the Complex Viscosity
of Complex Fluids
144l Elastic and Surfactant Effects on Dynamics of Drops Translating in a Microfluidic Device
144m Particle Motion in Microfluidic Contraction and Expansion Flows
144n Microchip Measurements of Intrinsic Viscosity of Polymers and Biopolymers
144o Microstructure of Multiphase Fluids in Homogeneous Shear Flows
144p Concentrated Suspension Flow through an Abrupt Expansion Measured by Nmri
144q Particle Migration Patterns Observed in Oscillatory Flow by Nmri
144r A Multi-Fluid Model of Superheated Fast-Fluidized Beds Based on Cluster Characteristics
144s Scalable Drag Law for Bubble Columns
144t On the
Relative Motion of Two Spherical Bubbles Rising in Line and
Interacting by a Laminar Wake
Session 147 -
Poster Session: Interfacial Phenomena
Chair: Paschalis
Alexandridis
Vice Chair: Vinay K. Gupta
147a Aggregation Properties of Inorganic Electrolyte-Sds-Peg Ternary System
147b Characterization of Asphaltenes and Resins Separated from Water-in-Crude Oil Emulsions Formed in Kuwaiti Oil Fields
147c Displacement
of Fibrinogen from the Air/Aqueous Interface by
Dilauroylphosphatidylcholine Lipid
147d Design of Corrosion Inhibitors for Carbon Steel Materials Using a Combined Density Functional Theory - Green's Function Approach
147e Preparation of Aminosilane Self-Assembled Monolayer for Immobilizing DNA
147f Thermodynamic
Insights of the Solubilization of an Epoxy Resin in Waterbby Means of a Non
Ionic Surfactant Synperonic. Study
of the O/W Microemulsion
147g Semi-Analytical Prediction of the Shape Change of Electrolyte Droplet on the Electrode Including the Ion Number Constraints
Session 148 - Poster Session: Thermodynamics and Transport Properties
Chair: Michael L. Greenfield
Vice Chair: Shekhar Garde
148a Accurate Ab Initio Thermochemistry Via Various Reaction Schemes
148aa Measurement and Modeling of Glass Transition Temperature of Cryoprotected Protein Crystallization Solutions
148ab Response
Surface Model on the Determination of Partial Molar Volume, Partial Molar
Refraction, Electronic Polarizability and Molecular Radii from Dilute
Multi-Component
Data Alone
148ac ß-D Galactose Pentaacetate - Supercritical Carbon Dioxide as a Novel Binder-Binder Removal Agent for Metal Casting Operations: Phase Behavior of the Binary System and Thermodynamic Modeling of the Phase Equilibria
148ad Gas Hydrate Equilibria in Porous Media with Pore Size Distributions
148ae Mass Transfer of a Methane Hydrate under Controlled Conditions of Water
148af A Comparison of Variable Reference Potential Models for Gas Hydrates
148ag Prediction of
the Dissociation Condition of a Simple Hydrate Phase on
an H-Lw-V Line in Isochoric Operation
148b Extension of the Trappe-Ua Force Field to Thiols, Sulfides and Disulfides
148c Nucleation for Confined Lennard-Jones Fluid by Density Functional Theory
148d Bulk and Interfacial Properties of Simple Confined Fluids
148e Monte Carlo Simulation of Polymers within a Lattice
148f Thermodynamically
Consistent Adaptation of Scaled Particle Theory to an Arbitrary Equation of
State: Hard Sphere Fluid Properties and a New Reference System for
Solvation Theories
148g The Effects of Disperse Attractions on Transport Properties Using Step Potential Equilibria and Dynamics (Spead)
148h First-Order Mean Spherical Approximation and Its Application to the Critical Region
148i Thermodynamic Expression of Electrolyte Solution
148j Helical Structure from an Isotropic Homopolymer Model
148k Equation of State for Hard-Spheres and Hard-Chains in the Glassy Region
148l Thermodynamic Characterization of Milspec Hydrazine
148m Global Parameter Optimization for Equations of State
148n Generalized Equation of State for the Perturbed-Chain Statistical Associating Fluid Theory
148o Incorporating Cross-Association in Aqueous Hydrogen Fluoride Mixtures
148p Saft1-Rpm Equation of State: Application to Phase Equilibria and Thermodynamic Properties of Carbon Dioxide + Aqueous Electrolyte Solutions
148q Triangular-Well of Variable Width: Theory and Molecular Simulation
148r Experimental Vapor-Liquid Equilibria for the Carbon Dioxide + Octane, and Carbon Dioxide + Decane Systems from 313 to 373 K
148s The Solubility, Compressed Liquid and Saturation Density of Phenol in Supercritical CO2
148t A New Algorithm for Calculating CO2-Crude Minimum Miscibility Pressure
148u Experimental Determination of the Liquid Phase Composition in the System CO2 / Methyldiethanolamine / H2o
148v Diffusion and Viscosity in Gas-Expanded Liquids
148w Friction Theory and Free-Volume Theory Coupled with Statistical Associating Fluid Theory in Viscosity Modeling: Pure N-Alkanes
148x An Eos-Based Viscosity Model for Polymer-Solvent Mixtures
148y Thermodynamics of Water Interaction in Stratum Corneum by Using Isothermal Calorimetry
148z Modelling of Nanocapsules Formation: Phase Separation during Mass Transfer Processes
Session 167 - Ionic Liquids: Thermodynamics and Transport
Chair: Edward J. Maginn
Vice Chair: Cor J. Peters
167a How to Tailor Ionic Liquids for Separation
167b Gas Solubilities in Tunable Ionic Liquids
167c Solubility and Diffusivity of Hydrofluorocarbons in Room-Temperature Ionic Liquids
167d Thermodynamic Modeling of the Phase Behavior of Binary Systems of Ionic Liquids and Carbon Dioxide with the Gc-Eos
167e Computational Screening of Ionic Liquids for Aromatic Extraction Using Cosmo-Rs
167f Molecular Dynamics Study of Pyridinium- and Triazolium-Based Ionic Liquids
167g Electrolytic Conductivities of Hydrophobic Room-Temperature Ionic Liquids
167h Compressed Liquid Densities for the Binary Mixture [Emim] Chloride + Octane and for the Ternary Mixture [Emim] Chloride + Octane + CO2
167i Ionic Liquids Based on Phosphonium, Imidazolium and Ammonium Cations as Pvc Plasticizers: Liquid Leaching, Solid Migration and Cytotoxicity Studies
Session 171 - Microfluidics and Low-Reynolds-Number Flows
Chair: Victor M. Ugaz
Vice Chair: James F. Gilchrist
171a Electrokinetic Transport in Nanoscale Fluidic Channels
171b Engineering on the Pore Scale: Partitioned Injections for Electrophoretic Separations
171c Pulsed Electrohydrodynamic Jetting for “Drop-and-Place" Particle Manipulation
171d Many-Particle
Hydrodynamic Interactions in Parallel-Wall Geometry: the Role of the
Far-Field Flow
171e Flow Dynamics in Injection Molding with Microfeatures
171f Chaotic Mixing in a Microfluidic Device Driven by Oscillatory Electroosmotic Flow
171g Gravity-Driven Motion of a Drop or Bubble near an Inclined Wall at Low Reynolds Number
171h Microfluidic Interfacial Tensiometry
171i Empirical Validation of the Hydraulic Design of a Silicon Carbide Micro-Channel Reactor for the Si Process
Hydrodynamic Dispersion in Narrow Microchannels: Shape Matters!
Session 172 - Modeling of Interfacial Systems
Chair: Paul R. Van
Tassel
Vice Chair: Elias
I. Franses
172a A Model for Rupture of Thin Equilibrium Films Due to Random Mechanical Perturbations
172b Monte Carlo Simulation of Equilibrium Reactions at Vapor-Liquid Interfaces
172c Nano-Colloidal Brushes in Non-Adsorbing Polymer Solutions
172d A Monte Carlo Study of Chain Conformation in a Cylindrical Confinement
172e A Nonlinear Two-Phase Model to Relate Semiequilibrium Dialysis and Ultrafiltration Results for Arsenic Solutions
172f Generalized Svrc-Qspr Predictions of Interfacial Tensions
172g Effect of Metal Adsorption on the Band Structure of Semiconducting Nanotubes
Session 186 -
Stability and Nonlinear Hydrodynamics
Chair:
Panagiotis Dimitrakopoulos
Vice Chair:
Vittorio Cristini
186a Dynamics and Breakup of Stretching
Bridges of Surfactant-Laden Liquids
186b Capillary Puddle Vibrations Linked to Defects in Planar-Flow Melt Spinning
186c Competitive Displacement of Thin Liquid Films on Chemically Patterned Substrates
186d Influence of Boundary Slip on the Dynamics and Stability of Thermally Driven Climbing Films with Significant Gravitational Counterflows
186e Linear Stability Analysis of Electrically-Driven, Viscoelastic Jets
186f Nonlinear Particle Segregation Instabilities in Micro-Vortices and Burger Dynamics
186g Transitional Pathway to Turbulence Found in Elastic Fluids
186h Thixotropy and Shear-Induced Microstructure of Shear-Thickening, Nanoaggregate, Fumed Silica Dispersions
186i Study on Taylor Vortex Formation in a Liquid Gap with Significant Boundary Effects
Session 190 - Templated Synthesis
Chair: Paschalis Alexandridis
Vice Chair: Alexander Couzis
190a Templated
Synthesis of Compound Semiconductor Nanostructures Using Lyotropic
Liquid Crystals
190b Preparation and Characterization of Silica Films with Aligned Cylindrical Mesopores on Porous Substrates
190c Silica Coating on a Bionanorod
190d Multi-Scale Assembly of Silica Sphere Particles through Aerosol Assisted Process
190e Sonication
and Electrodeposition of Rhodium: Effects on Plating Efficiency and
Surface Morphology
190f Synthesis and Characterization of Novel Metal-Organic Framework Structures
Session 192 - Transport in Nanoporous Materials
Chair: Randy Snurr
Vice Chair: Karl Johnson
192a MD Simulations of Water and Sodium Counter-Ion Diffusion in the Pores of Beta - Lactoglobulin Crystals
192b Pore Accessibility and Ion Transport in Ordered Mesoporous Silica Thin Films Determined by Electrochemical Methods
192c Spatially Resolved Measurements of Transport of Guest Molecules in Nanoporous Molecular Sieve Membranes
192d Multiscale Modeling for Bridging Disparate Scales of Diffusion in Polycrystalline Microporous Membranes
192e Transport of CO2 and N2 through Single-Walled Carbon Nanotube Membranes
192f Computer Simulations of Adsorption and Transport of a Quaternary Mixture Including Hydrogen in Zsm-5 and Silicalite
192g The Role of Diffusion in Separation of Gas Mixtures Using a Range of Zeolite Membranes: a Molecular Dynamics Study
192h Modeling Permeation in Nanoporous Media with Lattice Density Functional Theory
Session 217 - In Honor of John Anderson - I
Chair: Darrell Velegol
Vice Chair: Peter N Pintauro
217a A Hydrodynamic/Brownian Motion Model of Thermal Diffusion in Liquids
217b Inducing a Sol-Gel Transition in Clay Suspensions Using Added Nanoparticles
217c Effects of Particle Concentration on Efficiency of Chemical Mechanical Planarization
217d Tirm of Ac
Electrically Driven Motion of a Single Microparticle near Platinum and
Indium-Tin-Oxide Electrodes
217e Diffusioosmosis of an Electrolyte Solution along a Plane Wall
217f Porous Polyurethane Foam Scaffolds for Bone Tissue Engineering
217g Engineering Membranes for Environmental and Energy Applications
217h Electrokinetics and Australia
Session 221 - Microscale Flows
Chair: Victor M. Ugaz
Vice Chair: James F. Gilchrist
221a Polymer Chain Dynamics in Viscous Flow through Ordered Arrays of Posts
221b Concentration Effects on Chain Migration in Microfluidic Flow
221c Brownian Dynamics Simulations of Shear-Induced Migration of DNA Molecules in Dilute Solutions near a Solid Boundary
221d Electrostatic Bounds on the Hydrodynamic Friction and Mobility of Arbitrarily Shaped Bodies in Stokes Flow
221e Hysteresis, Force Oscillations and Non-Equilibrium Effects in the Adhesion of Nanoparticles to Atomically Smooth Surfaces
221f Detachment of a Large Particle from a Microchannel
221g Dynamics of Micron-Scale Objects in Shear Flow over Nanotextured Sensor Surfaces
221h A Method for Measuring Simultaneously the Fluid and Particle Mobilities under Strong DC and Low-Frequency Ac Fields
221i A Rapid Micro-Fluidic Bacteria Trap Based on High-Peclet Momentum and Particle Flux Coupling in Vortex Flows
221j Transport Coefficients and Orientational Distributions of Rodlike Particles with Magnetic Moment Normal to the Particle Axis under Circumstances of a Simple Shear Flow and an External Magnetic Field
Session 231 - Particulate and Multiphase Flow
Chair: Nina C. Shapley
Vice Chair: Eric M. Furst
231a Validation
Study of Bubble-Column Simulations for Uniform and Non-Uniform
Aeration Conditions
231b A Lattice-Boltzmann Method for Gas-Liquid Interfaces with Application to the Hindered Rise of Bubbles with Moderate Reynolds Numbers
231c Boundary-Integral Calculations for the Emulsion Flow through a Granular Material
231d Rheology of Semi-Dilute Suspensions of Polystyrene Ellipsoids at High Peclet Numbers
231e Rheology and Structure Formation in Sheared Suspensions of Elastic Particles
231f Accumulation of Particles at an Advancing Meniscus: Viscous Miscible Fingering in the Converging Parallel Plate Geometry
231g Evolution of the Flow of a Concentrated Suspension through an Annular Expansion Measured by Nmri
231h Secondary Flow Behavior and Charged Particle Transport in Bifurcations
231i Rheology of a Dilute Suspension of Non-Spherical Particles in Parallel-Wall Geometry
231j Dns of Dense Suspensions: Instabilities in Liquid-Fluidized Beds
Session 238 - Thermodynamic Properties and Phase Behavior: Part III
Chair: J. Ilja Siepmann
Vice Chair: Clare McCabe
238a Area 1a Keynote Address: Thinking like a Molecule-- Simulating Protein Aggregation
238b One Step Mechanism for the Nucleation of Insulin Crystals
238c Modelling of Strongly Polar and Polarizable Fluids and Their Mixtures
238d Phase Behavior of Dipolar Fluids from the Saft-Vr Equation of State
238e Assessing the Van Der Waals and Platteeuw Theory of Gas Hydrate Thermodynamics Using Monte Carlo Calculations of Hydrate Free Energies
Session 253 - Colloidal Hydrodynamics
Chair: Eric M. Furst
Vice Chair: Nina C. Shapley
253a Concentration Fluctuations in Dilute Suspensions of Orientable and Deformable Particles under Sedimentation
253b Effects of Particle Shape on Colloid Rheology and Shear Thickening
253c Dynamics of Concentrated Suspensions of Rigid and Semi-Rigid Brownian Fibers
253d Jamming in Carbon Nanotube Suspensions
253e Hydrodynamic Reversibility in Suspensions
253f Hydrodynamic and Brownian Fluctuations in Colloidal Suspensions
253g Local and
Large-Scale Structure in Sheared Suspensions and Their Impact
on Macroscopic Properties
253h Linear and Non-Linear Microrheology of Colloidal Suspensions
253i Dynamic Criterion for the Equilibrium Percolation Threshold of Weakly Attractive Colloids
253j Magnetorheological Measurements in Suspensions of Magnetic Nanoparticles
Session 254 - Complex and Bio-fluid Dynamics I
Chair: Patrick Doyle
Vice Chair: Victor Breedveld
254a Hindered Transport in Biological and Biomimetic Materials
254b Multipole Flows in Poroelastic Media and Neural Tissues
254c Cell Depletion in Synthetic Micro-Thrombosis: on the Enhanced FåHraeus Effect
254d Controlling the Motion of Cells along a Compliant Substrate by Tailoring Its Mechanical and Topological Properties
254e Hydrodynamics of Actin-Based Propulsion
254f Shear and Extensional Rheology of Polymer Solutions: Brownian Dynamics Simulations at Finite Concentrations
254g Brownian Dynamics Simulations of Polymer Blend Droplets
254h Rheology and
Flow-Induced Structure in a Polystyrene-Polyisoprene
Biocontinuous Microemulsion
254i Rheology and Sans of Block Copolymer - Protein Nanocomposites
Session 265 - In Honor of John Anderson - II
Chair: Darrell Velegol
Vice Chair: Peter N Pintauro
265a Appreciating Anderson's Etchings: Mica Membranes as Metaphor
265b Particles Slowly Coating a Surface
265c Automation in Pharmaceutical Process Research and Development
265d Characterization of Gel-Filled Porous Membranes Using Moment-Based Interpretation of Transport Measurements
265e Measuring Charge Nonuniformity on Colloidal Particles
265f Vesicles and Micelles in Mixtures of Surfactant and Amino Acid Hydrotropes
265g Protein-Polymer Interactions and Flavor: a Microfluidic Study
Session 269 - Multiscale Modeling: Thermodynamic and Mesoscale Properties
Chair: Hank Ashbaugh
Vice Chair: Mikhail A Anisimov
269a An
Application of Mean-Field Perturbation Theory for the Adsorption of Water
Molecules in Nanoslit-Pores
269b The Role of Critical Cavities in Homogeneous Bubble Nucleation
269c Viscosity of Hydration Water under Subnanometer Confinement between Mica Surfaces
269d Molecular Models of Wetting of Porous Solid Surfaces: Understanding Superhydrophobicity
269e Polyhedral Oligomeric Sislesquioxanes in Solution: Insights from All-Atom Molecular Dynamics Simulations
269f Molecularly Fine Tuning the Self-Assembly Micellar Systems through Global
Session 310 - Complex and Bio-fluid Dynamics II
Chair: Victor Breedveld
Vice Chair: Patrick Doyle
310a Live-Cell Microrheology
310b Tracer Microrheology of Polymer Solutions at Elevated Temperature and Pressure
310c Structure and Dynamics of Salt-Responsive Polyelectrolyte Solutions
310d Microrheology of Evolving Extra-Cellular Matrices
310e Forced Unfolding of Protein Domains Determines Cytoskeletal Rheology
310f Collective Dynamics in Suspensions of Swimming Particles
310g Flow and Confinement Effects on the Evolution of Surfactant Mesophases
310h Microfluidic Rheometry in Complex Fluids Using Flow-Induced Birefringence
310i Reversible Change of Nanostructures in Sodium Lauryl Ether Sulfate Systems
Session 324 - Fundamentals of Interfacial Phenomena I
Chair: Vinay K. Gupta
Vice Chair: Jan Sefcik
324a The Interactions between Deformable Interfaces: Detailed Experimental Studies Using Afm and Theoretical Modeling on the Nanoscale
324b High-Speed Imaging of Particle-Bubble Interaction
324c Sequestration of Amitriptyline by Liposomes
324d The Effect of Nonadsorbing Macromolecules on the Particle Dynamics near an Interface
324e Mapping Potential Energy Landscapes on Patterned Surfaces Using Diffusing Colloidal Probe Microscopy
324f Adsorption of Peptides on Solid Surfaces: an Interaction Site Model Study
Mechanical Properties of Peo/ Ppo/ Pluronic Interfaces
Session 337 - Novel Numerical Methods in Fluid Mechanics
Chair:
Dimitrios V. Papavassiliou
Vice Chair:
Nikolas Kazantzis
337a A Novel Efficient Pseudospectral Method for the Dns of Turbulent Flow in a Wavy Channel
337b Interfacial Dynamics in Stokes Flow Via an Efficient, Fully-Implicit, Time Integration Algorithm: Droplets and Membranes
337c Computing Three-Dimensional, Steady-State, Incompressible Flows Using a Parallel, Higher-Order, Mixed-Formulation, Galerkin Finite Element Method
337d A Finite-Element Phase-Field Method for Simulating Interfacial Dynamics in Complex Fluids
337e Turbulent Internal Flow Simulation Via the Lattice Boltzmann Method
337f The Effect of the Choice of the Primitive Variables on the Numerical Efficiency of Highly Transient Flows
337g Computational Modeling of Hydrodynamic Interactions between Two Vesicles Rolling on an Elastic Substrate in Shear Flow
Session 338 - Thermodynamic and Transport Properties in Supercritical Fluids
Chair: Ram Gupta
Vice Chair: Mark C. Thies
338a High Pressure Viscosity and Density of Pmma + Acetone + CO2
338b Supercritical Reaction Calorimetry: a Novel Route to Supercritical Fluid Reaction Monitoring
338c Sld Adsorption Model of Pure Coalbed Gases on Dry Argonne Premium Coal Matrices
338d Thermophysical Properties of Gas Expanded Liquids
338e Solubility of Metal Complexes in Supercritical Carbon Dioxide Solutions
338f Novel Surfactants with Biodegradable Tails for the C02-Water Interface
338g Extrapolation of Molecular Simulation Data: Application to Supercritical Fluids
Session 342 - Biomolecules at Interfaces I
Chair: James W. Schneider
Vice Chair: Maria M. Santore
342a Assembly State-Dependent Insertion of Amyloid-Beta Protein into Lipid Monolayers
342b Mobility of DNA on Supported Lipid Bilayers
342c Non-Natural,
Helical Peptoid Mimics of Lung Surfactant Protein B: Interactions with a
Lipid Film
342d Stabilization of Model Membrane Systems by Disaccharides. Quasielastic Neutron Scattering Experiments and Atomistic Simulations
342e Overcoming Mass Transport Limitations in Plasmon Resonance Biosensor
Session 355 - Fundamentals of Interfacial Phenomena II
Chair: Vinay K. Gupta
Vice Chair: Jan Sefcik
355a Structuring of Nanoparticles and Micelles Confined between Surfaces
355b Dynamics of Microparticles at Oil-Water Interfaces
355c Spreading Characteristics and Microscale Evaporative Heat Transfer in a Moving Meniscus Containing a Binary Mixture
355d Spreading and Two-Dimensional Mobility of Long-Chain Alkanes at Solid/Gas Interfaces
355e Ionization of Self-Assembled Surfaces of Bowl-Shaped Cavitands
355f Dynamic Behavior of Interfacial Properties in Photoresponsive Surfactant Systems
355g A Molecular Dynamics Study of the Wetting of Hydrophobic Substrates by Aqueous Surfactant Solutions
Session 357 - Imaging of Surfaces
Chair: Eric M. Furst
Vice Chair: Bing-Hung Chen
357a Probing the
Chemistry and Structure of Interfaces Utilizing Synchrotron Based
Surface Science
357b Measurement of Lipid and Protein Adsorption to the Air-Water Interface Using Quantitative Brewster Angle Microscopy
357c Studying Surfactant Aggregates on Metals by Atomic Force Microscopy
357d Image Analysis Methods for the Study of Biomolecular Complexes Using Afm
357e Probing
Effect of Rifampicin-Impregnated Silicone on Staphylococcus Epidermidis
Biofilm Formation
357f Probing the Adhesion Force between E.Coli and Modified Silicone Rubber Surfaces
357g Morphology and Amine Accessibility of (3-Aminopropyl)Triethoxysilane Films Prepared on Glass Surfaces
Session 360 - Interfacial and Electrochemical Phenomena in Microfluidics and MEMS Devices
Chair: Sammy S. Datwani
Vice Chair:
360a Vapor Phase Lubrication for Mems Devices
360b High Temperature in-Use Stiction of Cantilever Beams Coated with Perfluorinated Alkysiloxane Monolayers
360c Phase Separation of Immiscible Liquids Using Capillary Forces for Extraction in Continuous Flow Microchemical Systems
360d Total Internal Reflectance Microscopy on a Microfabricated High-Throughput Glass Chip: Application to Cholesterol-Modulated Antibody Binding to Supported Lipid Membranes
360e A New Electroosmotic Pump and Its Applications
360f Electrokinetic
Transport with Stokes Flow in Lab-on-a-Chip under Asymmetric
Surface Conditions
360g An Electric Circuit Model for Electrical Field Flow Fractionation
360h Measurement of Electrophoretic Mobility of Ionic Surfactant
360i Self-Propelling Semiconductor Devices Demonstrate New Electroosmotic Motility Principles
Session 368 - Polymerization and Polymer Processing in Supercritical Fluids
Chair: Ruben G. Carbonell
Vice Chair: Suresh L. Shenoy
368a High Pressure Crystallization of Polymers in Dense Fluids
368b Rheology of Reactive and High-Viscosity Polymers with Supercritical Carbon Dioxide
368c Structure and Rheology of Supercritical CO2 Exfoliated Polymer/Clay Nanocomposites
368d Property Prediction of Poly(Propylene) Plasticized by CO2
368e Foaming of Ps/Clay Nanocomposites in Supercritical Carbon Dioxide
368f Impacts of Phase Morphology on Polymer Blends Foaming Using Supercritical CO2
368g Novel Dynamic Microcellular Polystyrene Processing in Supercritical CO2
Session 376 - Solid-Liquid Interfaces I
Chair: Surita R. Bhatia
Vice Chair: Van N. Truskett
376a Layer-by-Layer Film Formation Kinetics under an Applied Electric Potential Measured by Optical Waveguide Lightmode Spectroscopy
376b Influence of Physical and Chemical Heterogeneity Shape on Thin Film Rupture
376c Reactive Surface Micropatterning by Wet Stamping
376d Effects of Catalyst Introduction Methods on Metal Pattern Structure and Selectivity Using Dendrimer/Polyelectrolyte Multilayer Coated Substrates
376e Surface Diffusion of DNA Oligonucleotides on Patterned Silane Surfaces
376f Loosely Packed, Hydroxyl Terminated Sams on Gold
376g Physically Self-Assembled Monolayers (Psam’S) of Lecithin Lipids at Hydrophilic Silicon Oxide Interfaces
Session 389 - Biomolecules at Interfaces II
Chair: James W. Schneider
Vice Chair: Maria M. Santore
389a Insulin Stability and Fibrillation with Surfaces: Role of Surface Wettability
389b Interfacial Concentration Dependence in Unfolding Proteins Using Afm
389c Protein
Adsorption Behavior and Control on Photopolymerized Scaffold Materials
for Tissue Engineering
389d Protein Interaction Forces at High Salt Measured Using Atomic Force Microcopy
389e Proteolytic Degradation of Immobilized Proteins at the Solid/Liquid Interface: Implications for Detergency
389f Mechanisms of Competitive Adsorption of Albumin and Sodium Myristate at the Silicon Oxide/Aqueous Interface
389g Adsorption Thermodynamics of Short-Chain Peptides on Charged and Uncharged Nanothin Polymer Films
Session 404 - Fundamentals of Interfacial Phenomena III
Chair: Vinay K. Gupta
Vice Chair: Jan Sefcik
404a Wetting Kinetics of a Thin Film under Evaporation in Air: Pinning of the Contact Line
404b Measurements of Surface Properties with Oscillating Supported Bubbles
404c Direct Measurement of Multi-Dimensional and Multi-Body Colloidal and Surface Interactions
404d Lateral Drop Adhesion
404e The Adsorption Mechanisms of Micelle-Forming Polylectrolyte/Neutral Diblock Copolymers
404f Ophthalmic Drug Delivery of Timolol by Soaked Contact Lenses
Charge
Instability Induced Breakups of Droplets Containing Ionic Solutes and
Suspended Nanoparticles
Session 421 - Solid-Liquid Interfaces II
Chair: Surita R. Bhatia
Vice Chair: Van N. Truskett
421a Microscopic Structure of the Electric Double Layer at the Cassiterite Surfaces
421b Wettability Alteration for Gas Condensate Reservoirs by Surfactant Treatment
421c Solidification Vs. Precipitation: Comparison between the Morphology of a Growing Interface by Two Different Mechanisms
421d Mineral Salt Crystallization on Ro Membranes and Surrogate Surfaces
421e Investigation of Solid/Liquid Interfaces by Sum-Frequency Spectroscopy: Nitrile Adsorption and Hydrogenation on Model Supports and Catalysts
421f Synthesis and Characterization of Nicop Alloys Via Electrodeposition
Hydrophilic Zeolite Coatings for Improved Heat Transfer at the Liquid-Solid Interface
Session 422 - Thermodynamics Under High Pressure
Chair: Sandro R. da Rocha
Vice Chair: Cor J. Peters
422a Studying Thin
Polymer Films under High Pressure Carbon Dioxide Using the
Quartz Crystal Microbalance
422b Evaluation of the Phase Equilibria of Gas Condensates and Light Petroleum Fractions Using the Saft-Vr Approach
422c Molecular Simulation of Hydrogen Sulfide
422d Thermodynamic Model for the Solubility of Light Hydrocarbons in Aqueous Sodium Chloride Solutions up to 600 K and 2 Kilobars, and 5 Nacl M
422e Solubility of Surfactant Templates in Supercritical Carbon Dioxide Solutions
422f Calculation of Solubility of Hydrogen in Hydrocarbons at High Pressures
Session 453 - Colloidal Phenomena with Supercritical Fluids
Chair: Sandro R. da
Rocha
Vice Chair: Michael
Cheung
453a Stable Dispersions of Nanoparticles in Dense Co2 Using Non-Fluorinated Ligands
453b The Removal of Ion-Implanted Photoresist from Microelectronic Devices Using Supercritical Carbon Dioxide
453c Monodisperse Core-Shell Silica Nanoparticle Dispersions in Liquid CO2
453d Microencapsulation of Hydrophilic Additives into Colloidal Polymers with the Aid of Compressed Carbon Dioxide
453e Formation Mechanism and Properties of Nanoparticles Produced by Supercritical Fluid Extraction of Emulsions
453f Electrostatic
Stabilization of Inorganic Particles and Water Droplets in Supercritical
Carbon Dioxide
453g Catalysis and Recycling of Metal Nanoparticles Stabilized by Microemulsions
453h Dynamic Biomolecular Interactions at the Aqueous Interface with Compressed and Supercritical Fluids
Session 482 - Transport at Interfaces I
Chair: Anuj Chauhan
Vice Chair: Elias I. Franses
482a A Transport
Theory and Validating Experiments for the Adsorption of
Surfactant from Micellar Solutions to an Initially Clean Air/Water Interface
Including the Direct Adsorption of Aggregates
482b Modeling of Adsorption Dynamics at Air-Liquid Interfaces Using Statistical Rate Theory (Srt): Non-Ideal Surfaces
482c The Effect of
Serum Proteins and Hydrophilic Polymers on the Transport of
Model Lung Surfactant
482d Competitive Adsorption of Fibrinogen and Dipalmitoylphosphatidylcholine at the Air/Aqueous Interface
482e Drying and Swelling of Surfactant Films
482f Construction of Extracellular Matrix Mimics and Their Effect on the Kinetics and Thermodynamics of Receptor-Ligand Binding on Supported Lipid Bilayers
482g Submonolayer Coverage of Long Chain Alkanes at Sio2/Air Interfaces: Molecular Mobility and Aggregation Behavior
Session 508 - Materials Synthesis and Processing with Supercritical Fluids I
Chair: Christopher B. Roberts
Vice Chair: Veera Boddu
508a CO2-Induced Plasticization and Viscosity Reduction in Pharmaceutical Polymers
508b Supercritical Carbon Dioxide Exfoliated Polymer Nanocomposites
508c Pore Expansion in Cationic Fluorinated Surfactant Templated Porous Silica Thin Films through Supercritical Carbon Dioxide Processing
508d Directly Patterned Mesoporous Carbon Film Prepared Using Block Copolymer Templates in Supercritical Co2
508e Hydrothermal Synthesis and Deposition of Iron Oxide Nanoparticles in Activated Carbon
508f Covalent Molecular Assembly in Supercritical Carbon Dioxide: a Preparative Method for Non-Fluorinated Functional Ultrathin Films
508g Oxygenated Hydrocarbon Ionic Surfactants Exhibit CO2 Solubility
Session 514 - Nanoparticle Synthesis and Stabilization I
Chair: Darrell Velegol
Vice Chair: Anuj Chauhan
514a Controlled Self-Assembly of Monodisperse Magnetic Nanoparticles
514b Novel Synthetic Method for Narrow Distributed Colloidal Silicalite
514c Kinetics and Size Distributions in Deaggregation of Titania Nanocolloids
514d Preparation of Nickel Nanoparticles in the Presence of Sodium Dodecyl Sulfate - Polyvinylpyrrolidone Clusters
514e Control of Gold Nanoparticle Aggregates by Manipulation of Interparticle Interaction
514f The Use of Heat Transfer Fluids in the Synthesis of High-Quality Cdse Quantum Dots, Core/Shell Quantum Dots, and Quantum Rods
514g Nanocrystal Interparticle Interactions in Organic and Supercritical Solvents
Session 527 - Transport at Interfaces II
Chair: Elias I. Franses
Vice Chair: Anuj Chauhan
527a Finite Element Computations of Surfactant-Mediated Spreading on Solid Surfaces
527b Wetting Kinetics of Thin Films of Dilute Polymer Solutions
527c An Investigation of the Spreading Dynamics of Sessile Drops of Polymer Blends
527d Electron Transport on Metal-Molecule-Semiconductor Interfaces
527e Lithium-Ion Conducting Channels for Solid State Lithium Ion Batteries
527f Effect of
Rbcs on Dispersion in Tissues and Inclusion of Dispersion in
Pharmacokinetic Models
527g Thermodynamics and Dynamics of Diblock Copolymers
Session 546 - Materials Synthesis and Processing with Supercritical Fluids II
Chair: Raashina Humayun
Vice Chair: Rajesh Dave
546a Development of Supported Nanoparticulate Metal Complexes Using Compressed Carbon Dioxide as Antisolvent
546b Reductive Deposition of Cerium Oxide Films in Carbon Dioxide
546c Synthesis of Metal Oxide Nanoaerogels Via a Sol-Gel Route in Supercritical CO2
546d Copper Chelation for Microelectronic Interconnects in Supercritical Carbon Dioxide
546e Copper Etching Using Hexafluoroacetylacetone (Hfach) Dissolved in Supercritical Co2: a Kinetic Investigation
546f Comparative Study of Covalent Molecular Assembly of Oligoimide Ultrathin Films in Supercritical Carbon Dioxide and Liquid Solvent
Session 549 -
Nano-Scale Interfacial Fundamentals
Chair: Robert D.
Tilton
Vice Chair: Raymond
R. Dagastine
549a Directed Assembly of Single-Walled
Carbon Nanotubes at Liquid-Liquid Interfaces; Carbon Nanotubes as Nanoscale
Conveyors for Interfacial Biocatalysis
549b Nanoscale Interactions between Colloidal Particles
549c Modelling the Micron- and Nano-Scale Trends in the Steady-State Concentration Profile of a Charged Solute Adjacent to a Membrane Surface
549d Continuous Polyelectrolyte Nanofilm Growth under an Applied Electric Potential
549e Manipulation of the Electrode/Electrolyte Interface of Gold Via the Application of an External Electric Field
549f Trapping and Condensing DNA at the Air/Water Interface
549g Modeling of Interfacial Polymerization to Nanocapsule Formation
Session 550 - Nanoparticle Synthesis and Stabilization II
Chair: Darrell Velegol
Vice Chair: Anuj Chauhan
550a Preparation of Polyetherimide Nanoparticles by Electrospray Drying, and Their Use in the Preparation of Nano-Sized Carbon Molecular Sieve (Cms) Adsorbents and Membranes
550b Novel Method
for Micro- and Nano- Particle Preparation by
Electrohydrodynamic Atomization
550c Synthesis of Anisotropic Particles by Seeded Emulsion Polymerization
550d Size and Shape-Controlled Synthesis of Metal Nanostructures Templated by Amphiphilic Block Copolymers
550e Synthesis and Characterization of Novel Star Polymers
550f Development of Triblock Copolymers as Dispersants and Interfacial Delivery Vehicles for Reactive Nanoparticulate Iron
550g Colloidal Particles Coated and Stabilized by DNA-Wrapped Carbon Nanotubes
Session 577 - Nano-scale Modeling of Interfacial Systems
Chair: Paul R. Van
Tassel
Vice Chair: Elias
I. Franses
577a Molecular Modeling of Transport across Surfactant-Covered Interfaces of Microemulsions
577b Molecular Dynamics Study of Propanic Acids at the Water-Isobutanol Interfaces
577c Structure and Dynamics of Dendrimer Encapsulated Nanoparticles in Aqueous Solutions
577d Inverse Density Functional Theory as a Tool for Measuring Colloid-Surface Interactions
577e Simplified Crossover Droplet Model for Adsorption of Critical and Supercritical Fluids in Slit Nano-Pores
577f Colloidal
Interactions in Mixtures of Symmetric and Asymmetric Electrolytes: a Monte
Carlo Study
577g Microscopic Approach for the Design of Surfactants for Pmdi-Based Formulations: Ab Initio Calculations and Chemical Force Microscopy
Session 585 - Processing of Pharmaceuticals and Nutraceuticals under High Pressure
Chair: David Suleiman
Vice Chair: Sudhir N Aki
585a Nanoparticle Fabrication of Biodegradable Polymers Using Supercritical Antisolvent: Effects of Mixing and Thermodynamic Properties
585b Visualization
of the Effects of Processing Conditions on the Spray Characteristics
in Sas Precipitation
585c Synthesis of Supercritical Crystallization Processes
585d CO2-Soluble
Gras Solvents for Extracting Nutraceuticals by a Gas
Anti-Solvent (Gas) Process
585e Separation of Flurbiprofen Enantiomers with Supercritical and Sub-Critical Expanded Fluids
585f Sulfoxide Solvents and Surfactants for Facile Separations
Session 587 - Self-Assembly in Solution I
Chair: Srinivasa R Raghavan
Vice Chair: Orlin D. Velev
587a Shear-Induced Banding and Phase Separation in Solutions of Wormlike Micelles
587b Synchrotron X-Ray Characterization of Pna-Amphiphile Micelles
587c Calorimetric Determination of Surfactant/Polyelectrolyte Binding Isotherms
587d Polymer-Surfactant Complexes: Structure Affected by Solvent Properties
587e Two Step Mechanism for the Nucleation Fibers of Sickle Cell Anemia Hemoglobin
587f Computer Simulation of Fibril Forming Peptides
587g Nanocomposites under Shear: Alignment of Inorganic Nanoparticle and Protein Arrays Templated in Block-Copolymer Mesophases
587h Dynamics of Nanoparticles in an Entangled Wormlike Micellar Network
Session 603 - Interfacial Phenomena in Materials Processing / Crystallization
Chair: Marina Tsianou
Vice Chair: Michael F. Doherty
603a Detailed
Analyses of Transport Limitations during Afm Measurements of
Solution Crystal Growth
603b A Novel Ex-Situ Scale Observation Detector (Exsod) for Mineral Scale Characterization and Online Ro Process Monitoring
603c Controlling
Calcium Carbonate Crystallization with Carboxylic Acid Containing
Polymer Adsorbates
603d Effects of Polymers on Crystal Growth and Morphology of Salbutamol Sulphate
603e Crystal Comets: Dewetting during Emulsion Droplet Crystallization
603f Two-Dimensional Monte Carlo Simulations of a Polydisperse Colloidal Dispersion Composed of Ferromagnetic Particles
603g Synthesis of
Gold Nanocrystals Using Polyethyleneglycol-Sodium Dodecyl
Sulfate as Soft Template
Session 610 - Self-Assembly in Solution II
Chair: Srinivasa R Raghavan
Vice Chair: Orlin D. Velev
610a Self-Assembled Encapsulation Membranes from Bioactive Colloids
610b Phase
Behavior and Polymerization of Bicontinuous Divinylbenzene/Sugar
Microemulsion Glasses
610c Formation of Vesicles from Undecylenic Acid and Their Subsequent Polymerization
610d Growth Kinetics of Polyamine/Salt Coacervates
610e From Oblate Cylinders to Elastic Films: a Neutron Scattering and Dilatational Rheology Investigation of Asphaltene Self-Assembly in Solution and at the Oil/Water Interface
610f Effect of Grafted Peg on Fluctuating Membranes of Spontaneous Vesicles
610g Molecular Relaxation Dynamics of Self-Assembled Monolayers
Session 611 - Supercooled Liquids and Glasses
Chair: Thomas M. Truskett
Vice Chair: Sharon C. Glotzer
611a “Caging" Dynamics of a Strong Glass Former
611b Role of Local Structure and Icosahedrality in Spatially Heterogeneous Dynamics in Supercooled, Glass-Forming Liquids
611c Influence of Local Packing on Dynamics in a Model Glassy Polymer
611d The Impact of Confinement on Entropy and Liquid-State Dynamics: Thermodynamic Expectations and Experimental Trends
611e Scaling of
Energy Landscape Features in Stressed Systems and Relationship to
Viscoelastic Processes
611f Spatially Heterogeneous Dynamics in Molten Silica
611g Cluster Kinetics of Pressure-Induced Glass Formation
611h The Heat of Condensation of Supercooled D2O
Session 23 - Fundamentals of Adsorption and Ion Exchange I
Chair: Peter A. Monson
Vice Chair: Jose P. Mota
23a Adsorption of Water in Zeolites as Studied by Molecular Simulations
23b Ion – Exchange of Monovalent and Bivalent Cations with Naa Zeolite Membranes : a Molecular Dynamics Study
23c Quasi-One-Dimensional Adsorption of Alkanes on Carbon Nanotubes Observed from Experiments and Simulations
23d Adsorption Behavior of Repulsive Molecules
23e Adsorption and Self-Assembly of Surfactants in Nanopores
23f Hysteresis in Sorption by Mesopores
23g Three-Dimensional Reconstruction of Mesoporous MaterialsUsing Gas Adsorption and Structure Factor Data
Session 29 -
Membrane Tutorial
Chair: John Pellegrino
Vice Chair: Kamalesh K. Sirkar
29a Design of Hollow Fiber Membrane Modules
29b Experimental and Theoretical Aspects of Catalytic Membrane Reactors
29c Overview of Membrane Bioreactors
29d Adsorptive Membrane Based Separations
29e Tutorial on Membrane Gas Separation
29f Polymeric Membranes for Fuel Cells: Overview and Recent Developments
Session 30 - Modeling Transport through Membranes I
Chair: Glenn Lipscomb
Vice Chair: Alan Gabelman
30a Combining Previous Theoretical Analyses into an in Silico Predictive Global Model for Microfiltration of Complex Suspensions and Macromolecular Solutions
30b Modeling Pilot-Scale Cross-Flow Filtration of Simulated Nuclear Waste
30c Modeling
Flow through Microfiltration Membranes Using Data from
High-Resolution 3d Imaging
30d Medium Swelling and Pleat Crowding Effects in Cartridge Filters
30e A Predictive Numerical Model for Unsteady State Scale Formation in a Spiral-Wound Membrane Module with Channel Spacers
Session 65 - Future Directions of Membrane Science (invited papers) I
Chair: William Krantz
Vice Chair: Alfred Gaertner
65a Materials & Materials Processing Opportunities to Enable Future Membrane Development
65b Nurturing Membranes from Nature: Possible Opportunities for the Future
65c Biotechnology in Everyday Life: Opportunities for Membrane Technology in Non-Pharmaceutical Biotechnology
65d Membrane Clarification
Session 79 - SMB technology
Chair: Marco Mazzotti
Vice Chair: Linda S. Cheng
79a Optimization Strategies for Simulated Moving Bed and Powerfeed Processes
79b Implementation of an on-Line Optimization Based Control Scheme on a Laboratory Simulated Moving Bed Plant
79c A Five-Zone Simulated Moving Bed for Isolation of Six Sugars from Biomass Hydrolyzate
79d Theory and Practice of Single-Column Smb Analogs
79e Simulated Moving Bed Systems for Center-Cut Separation from Quaternary Mixtures
79f Optimal
Economic Design and Operation of Single and Multi-Column
Chromatographic Processes
79g A Two-Bed Simulated Moving-Bed Adsorber for the Fractionation of Gas Mixtures
79h Parallel Two-Zone and Four-Zone Hybrid Smb System for the Separation of P-Xylene
Session 105 - Advances in Liquid Separation Membranes and Applications: Part I
Chair: Norman N. Li
Vice Chair: D. Bhattacharyya
105a Progresses in Membrane Reactors (Invited Keynote Speaker)
105b Interfacially Polymerized Flat and Hollow Fiber Thin Film Composite Membranes Based on Microporous Polypropylene
105c Hybrid Polymeric/Ceramic Membranes for Water Purification
105d Anti-Fouling Membranes for Water Treatment
105e Role of Foulant-Foulant Adhesion in Organic Fouling of Reverse Osmosis Membranes
105f Advances in Hemodialysis Applications
Session 120 - Fundamentals of Adsorption and Ion Exchange II
Chair: Peter A. Monson
Vice Chair: Jose P. Mota
120a Diffusion of C7 Hydrocarbons in Mesostructured Zeolitic Ul-Zsm-5 Materials
120b Dynamic Adsorption and Desorption of Carbon Dioxide in Potassium-Promoted Hydrotalcite
120c Kinetics of Sorption of 1,3 DI-Isopropyl Benzene and 1,3,5 Tri-Isopropyl Benzene in Nay Crystals, Alumina Matrix and Fcc Catalyst Particles by Zero Length Column Method
120d Roles of Steric and Acid-Base Factors in CO2 Adsorption in Alkali-Metal Cation Exchanged Y and X Zeolites
120e Two-Site Equilibrium Model for Ion Exchange between Multivalent Cations and Zeolite-a in a Molten Salt
120f Effects of Reversible Association on Size Exclusion Chromatography of Proteins
120g Diffusities of N-Alkanes in Silicalite Using the Zlc Method
Session 150 - Adsorption from Mixtures
Chair: Celio L. Cavalcante Jr
Vice Chair: Shamsuzzaman Farooq
150a Propylene Separation from C3 Fractionator Feed Gas by Pressure Swing Adsorption
150b Effects of
Carboxylic Acids on Liquid-Phase Adsorption of Ethanol and Water by
High-Silica Zsm-5
150c Standing Wave Design of Carousel Ion-Exchange Processes for the Removal of Zinc Ions from a Protein Mixture
150d Competitive Adsorption of Heavy Metals Onto Straw
150e Optimisation of Adsorption and Desorption Processes of Heavy Metals from Different Matrices Prior to Atomic Absorption Spectroscopy
150f Multicomponent Adsorption of C1-C4 Hydrocarbons on Activated Carbon
Session 163 - Experimental Methods in Adsorption I
Chair: Stefano Brandani
Vice Chair: F. Handan Tezel
163a Use of Both Pressure-Swing and Concentration-Swing Frequency Response Methods to Determine Mass Transfer Mechanisms and Parameters for Pure and Mixed Adsorbates in Nanoporous Adsorbents
163b Effect of Nonlinear Equilibrium on Zero Length Column Experiments in Mesoporous or Macroporous Sorbents: Limiting Analytical Asymptotic Forms
163c Sorption Measurements of Alkanes on Zeolites under Equilibrium and Non-Equilibrium
163d Determination of Dynamic Mass Transfer Properties in O2 Rpsa
163e Characterization of Liquid Adsorption Columns by Computed Tomography (Ct)
163f Protein Adsorption Kinetics Measurements with Radioactive Tracers
Session 166 - Future Directions of Membrane Science (invited papers) II
Chair: Alfred Gaertner
Vice Chair: William B. Krantz
166a Future Directions for Membrane Technology in the Pharmaceutical Industry
166b 'Future Directions of Membrane in Biopharmaceutical Processes; Ultrafiltration:Where Have We Been and Where Are We Going...'
166c Membrane Science and Intelligent Therapeutics
166d Tools for the Fast Development of Membrane Processes
Session 170 - Microdevices in Separations
Chair: Anup K. Singh
170a Focusing, Collection, and Metering of DNA Using Microfabricated Electrode Arrays
170b Miniaturized High-Performance Liquid Chromatography (Hplc) System Using Capillary-Scale Electrokinetic Micropumps
170c Blood Cell Separation Issues in Miniature Blood Diagnostic Kits
170d Rapid Bacteria Trapping Using Micro-Fluidic Vortex Flow
170e Development of
Environmentally Sensitive Affinity Hydrogels for
Bioseparations in Microdevices
170f Micro-Structured Membrane Dispersion Mixer and Its Characteristics
170g Poisson's Effect in Electrical Field Flow Fractionation
Session 214 - Fuel Cell Membranes I
Chair: W.S. Winston Ho
Vice Chair: Santi Kulprathipanja
214a Design and Synthesis of Optimized Sofc Structures
214b A Nanoporous
Silicon Based Membrane Electrode Assembly for on-Chip
Micro Fuel Cell Applications
214c Molecular
Design of Pems: Rigid Rod Liquid Crystalline
Polyelectrolytes-Synthesis and Properties
214d The Effect of Temperature and Pre-Treatment on Water and Methanol Sorption and Diffusion in a Short-Side-Chain Perfluorosulfonic Acid Ionomer Membrane for Pemfcs
214e The Effect of Membrane Thickness on Short- and Long-Term Performance of a Direct Methanol Fuel Cell
214f Nafion/Zeolite Nanocomposite Membrane for Direct Methanol Fuel Cell
214g New Conceptual Zeolitic Direct Methanol Micro Fuel Cell
Session 223 - Molecular Simulation of Adsorption
Chair: Alexander V. Neimark
223a Adsorption
Simulations and Biology: Grand Canonical Monte Carlo
Calculations of Binding Locations, Occupancy, and Free Energies of
Xenon in Comp and Mutant Phage T4 Lysozyme L99a
223b Water Adsorption Isotherms in Molecularly Reconstructed Models of Activated and Un-Activated Carbons Obtained from Saccharose
223c Coarse Graining of Molecular Models for Fluids in Porous Materials
223d Adsorption of Nitrogen and Methane in Ets-4
223e Adsorption of Water in Polyoxoniobate Materials. a Molecular Simulation Investigation
223f Density Functional Theory Model of Adsorption on Amorphous and Microporous Solids
223g Comparison of Adsorption of Spherical and Non-Spherical Nitrogen in Parallel Slit Pores Using Density Functional Theory: Density Profiles and Pore Size Distributions
Session 230 - Novel Membranes and Membrane Processes for Recovery/recycle
Chair: Yoram Cohen
Vice Chair: William Krantz
230a Antifouling
Thin Film Nanocomposite (Tfnc) Membranes for Desalination
and Water Reclamation
230b Dendrimer-Ceramic Nanocomposite Membranes for Voc Recovery
230c High Recovery Desalination of Agricultural Drainage Water: Integration of Accelerated Chemical Precipitation with Ro Membrane Desalination
230d Electrodialysis as an Alternative Seawater Desalination Method
230e Cyanide Removal from Industrial Praziquantel Wastewater Using Integrated Coagulation – Gas-Filled Membrane Absorption
230f Separation of Fluorine Containing Greenhouse Gases with Porous Membranes
Session 245 - Advances in Liquid Separation Membranes and Applications: Non-Aqueous Systems
Chair: Norman N. Li
Vice Chair: Jamie A. Hestekin
245a New Applications of Organic Solvent Nanofiltration and Pervaporation in Chemical and Refining Processes (Invited Keynote Speaker)
245b Novel Polymeric Membrane for Dehydration of Organic Solvents
245c Preferential Permeability of Methanol into Water Using Polysilicone and Polytrimethylsilylpropyne Membranes
245d Membrane Pervaporation Process for Diacetone Alcohol – Water Separations
245e The
Pervaporation Dehydration of Isopropanol by Btda-Tdi/MDI (P84)
Co-Polyimide Membranes
Session 261 - Experimental Methods in Adsorption II
Chair: F. Handan Tezel
Vice Chair: Stefano Brandani
261a Evaluation of Surface Area and Porosity from Physisorption Isotherms
261b Removal of Arsenic and Chromium Ions from a Mixed Aqueous Solution Using a Continuous, Hybrid Field-Gradient Magnetic Separation Device
261c Accurate Hydrogen Sorption Measurements Via Differential Pressure Analyses
261d Development of a New Volumetric Gravimetric Device of H2 Sorption for the Analysis of Zeolites under Equilibrium Conditions
261e Experimental Uncertainties of Volumetric Methods for Measuring Equilibrium Adsorption
261f Investigation
of the Surface Heterogeneity of Solids from Reversed
Flow Gas Chromatography
261g Structural Characterisation of Adsorbed Films in Periodic Mesoporous Silica by in-Situ Small-Angle X- Ray Diffraction
Session 267 - Modeling Transport through Membranes II
Chair: Glenn Lipscomb
Vice Chair: Alan Gabelman
267a Barrier Membranes: How Good Are Geometric Estimates for Flux and Lag Time?
267b Multicomponent Transport in Membranes: Theory and Experiment
267c Double Sided Thin Film Membranes - Higher Flux and Selectivity
267d Flux Coupling in Pervaporation of Binary Alcohol-Water Mixtures through a Microporous Silica Membrane
267e Optimization of Membrane Mixtures and Mass Transfer of Supported Liquid Membranes
Session 288 - Poster Session on Adsorption and Ion Exchange
Chair: Mark Davis
Vice Chair: Linda S. Cheng
288a One-Column Analog to Smb for Center-Cut Separation from Quaternary Mixtures
288b Assessment of Smb Performance Using a Single-Column Setup
288c Efficient Computational Methods to Calculate the Periodic State of Smb Processes
288d Single-Column Simulated-Moving-Bed Process with Recycle Lag
288e Binding of Transition Metals to Silica-Bound Branched Poly(Ethyleneimine): a Raman Spectroscopic Study
288f Activated Carbons from Biomass for Methane and Hydrogen Storage
288g The Role of Dissociation-Reaction in Simulated Moving Bed Purification of Lactic Acid Using Ion Exchange Resin
288h Effects of Partial Withdrawal on the Performance of Four-Zone Simulated Moving Bed
288i Modeling and Simulation of Non-Isothermal Adsorption Separation Systems
288j Kinetic Separation of Co2/Ch4 Mixture Using Carbon Molecular Sieve by Two-Bed Psa: Nonisothermal Operation
288k A Mechanistic View of Pressure Swing Adsorption Processes
288l Cadmium Sorption by Some Alkaline Soils of North-West India
288m The Reuse of Biosludge as an Adsorbent for Benzene and Dye Adsorption
288n On Determination Procedure of Intraparticle Diffusivity from Multi-Component Chromatogram for Non-Linear Systems
288o Evaluation of Surface Area and Porosity Utilizing Physisorption Isotherms: Porous Materials
288p Enrichment of Lead (II) Ions Using Phthalic Acid Functionalized Xad-16 Resin as a Sorbent
288q A New Concept about Adsorption Effect on Kinetic Resolution of Racemates Catalyzed by Immobilized Enzymes in a Batch Reactor
Session 290 - Poster Session: Membranes
Chair: Glenn Lipscomb
Vice Chair: Ranil Wickramasinghe
290a Membrane
Extraction through Double-Pass Cross-Flow Flat-Plate Modules with
External Recycle
290b Crystallization on Ro Membranes and Surrogate Surfaces
290c Amino Acid Resolution Using Supported Liquid Membranes
290d Enveloped and Non-Enveloped Virus Clearance by Flocculation Prior to Microfiltration
290e Ultrafiltration of Endo-Pectinase Solution with a Static Mixer Placed in a Ceramic Membrane
290f Control of
Chemical, Thermal, and Gas Transport Properties in Dense
Phosphazene Polymer Membranes
290g A Nucleation Theory Based Approach for Understanding Nanofiltration/Reverse Osmosis Membranes Scaling Limits
290h Hydrogen Permeation through Microporous Silicon Carbide-Based Membranes Derived from Polycarbosilane Precursor
290i Design and Operation of Batch Extractive Distillation with Two Reboilers
290j Hydrogen Permeation Behavior of Thin Pd Film on Alpha Alumina Hollow Fiber Based on a Novel Catalyzing Process
290k Influence of Thermally Labile Polymer on Gas Separation Properties of Carbon Membranes Derived from Poly(2,6-Dimethyl-1,4-Phenylene Oxide)
290l Deep Desulfurization of Transportation Fuels Via Supported Ionic Liquid Membranes
290m Membrane-Supported Metallic Nanoparticles for the Dechlorination of Organics in Water
290n Integration of Heat Pumps in Pervaporation Systems for Improved Energy Efficiency
290o Removal of Arsenic (V) from Water Using Cationic Amphiphilic Molecules and Ultrafiltration Membrane: Effects of Amphiphile, Initial Arsenic (V) Concentration, Membrane Type and Membrane Pore Size, and Existing Co-Ions
290p Theoretical
Observations of Recirculation Regions in the Bore Fluid
during Hollow Fiber Spinning
290q Chemical and Mechanical Stability of Membranes Modified by Ion Beam Irradiation
290r Hydraulic and Chemical Cleaning of Cellulose Acetate Ultrafiltration Membranes
290s Analysis of Fouled Water Treatment Membranes and Determination of Foulant Irreversibility
290t Membrane Applications for Recovery & Renewable Energy
290u Nanoparticle-Induced Desilylation of Substituted Acetylene Polymers to Prepare Gas Separation Membranes with Exceptional Chemical Resistance
290v An on-Line
Study of Progressive Ro Membrane Mineral Scaling by
Time-Lapse Photo Microscopy
290w A Theoretical and Experimental Method of Enhancing Mass Transfer in Flat Plate Membrane Distillation Using CFD
290x Prevention of Precipitation Fouling in Ro by Reverse Flow Operation
Session 292 - Poster Session: Recent Developments in Crystallization and Evaporation
Chair: R. Dennis Vigil
Vice Chair: Joe Schroer
292a Numerical Simulation on the Effects of the Design Feature of a Cyclone and the Inlet Flow Velocity on the Separation of Co2 Particles from a Co2-Cof2 Mixture
292b Supersaturation Monitoring and Control with Atr-Ftir
292c Effect of
Additives on the Nucleation Kinetics of Hen Egg White Lysozyme
and Glucose Isomerase
292d A Study of Iron Sulfide Film Formation in H2S Environments
Session 293 - Poster Session: Separations (general)
Chair: Stephen M. Ritchie
293a Enhanced Gas Separation Performance in Polyethersulfone (Pes)-Modified Zeolite Mixed Matrix Membranes
293b Measurement of Infinite Dilution Activity Coefficients of Alkanes in Ionic Liquid Using Gas-Liquid Chromatography
293c Ethanol Production: Applicability of Reactive Separation
293d Separation of P-Xylene from the Ternary Xylene System by Distillative Freezing
293e Macromolecular Separation Based on Unique Microscale Transport
293f A Generalized Particle Model for Pressure Drop through Structured and Random Packings
293g Prediction of Shear Damage in Industrial Scale Process Using an Ultrascale-down Device
293h Ethoxylated Nonionic Surfactants in Hydrophobic Solvents: Separation Using Membrane Immobilized Poly-Acrylic Acid
Reuse of Washing Water Used in Dehydration and Desalted Process of Crude Oil
Session 298 - Advances in Liquid Separation Membranes and Applications: Part II
Chair: Isabel Escobar
Vice Chair: D. Bhattacharyya
298a Facilitated Transport Membranes: New Directions for Environmental, Bio and Energy Applications (Invited Keynote Speaker)
298b Evaluation of
Nanoporous Lyotropic Liquid Crystal Polymer Membranes
for Reverse Osmosis
298c Solvent-Membrane Interactions in Liquid Co2 and Organic Solvent Permeation through Mesoporous & Gamma - Alumina, Titania, and Zirconia Membranes
298d A Novel Evaluation and Characterization Technique for Solvent Resistant Nanofiltration (Srnf) and Reverse Osmosis (Srro) Membranes
298e Desalination Using a Novel Ammonia-Carbon Dioxide Forward Osmosis Process: Evaluation of Process Performance
Session 308 - Characterization of Novel Adsorbents
Chair: Peter I. Ravikovitch
308a Non-Destructive, Quantitative Characterization of Microporous Thin Film Polycrystallinity for Elucidating Structure-Properties Relations
308b Different Methods for Mesoporous Silica Synthesis and Their Effects on Surface Properties
308c Effect of Surface Chemistry on the Sorption, Wetting and Phase Behavior of Water and Simple Fluids in Novel Ordered Mesoporous Materials
308d Removal of Ammonium and Organic Compounds by Ion Exchange and Adsorption
308e Synthesis and Characterization of Microfibrous Media Supported K2co3 for CO2 Capture
308f Characterization of Cr(VI) Ion Exchange with Hydrotalcite
308g Characterization of Metal-Organic Framework as Novel Adsorbent
308h Removal of
the Structure-Directing Agent from a Thermally Unstable Cobalt
Substituted Aluminophosphate
Session 311 - Crystallization of Pharmaceutical and Biological Molecules: I
Chair: Venkateswarlu Bhamidi
Vice Chair: Christopher Burcham
311a Antisolvent Crystallization and Mixing in Porous Hollow Fiber Devices
311b Using Complex
Crystallizer Configurations in a Batch System to Affect Crystal Size
and Morphology
311c Effect of Molecular Speciation of Impurities on Amino Acid Crystallization
311d Estimation of Critical Supersaturation Using a Microdroplet Evaporation Technique
311e Adaptive Neuro-Fuzzy Modeling of Protein Crystal Nucleation Kinetics
311f Crystal Growth by Spiral Motion
Session 334 - Mixed Matrix Membranes
Chair: Santi Kulprathipanja
Vice Chair: Stephen M. Ritchie
334a Fabrication
and Characterization of Zeolite/Polymer Mixed Matrix
Nano-Composite Hollow Fiber Membranes
334b Mixed Matrix Speek Based Membranes for Direct Methanol Fuel Cell
334c Macrovoids in Mixed Matrix Hollow Fiber Membranes
334d Permeability Enhancement in Nanoparticle Filled Polymeric Membranes
334e Nanoparticles Embedded Membrane Reactor for the Reductive Degradation of Chlorinated Organics: Tce and Pcb Studies
334f Room Temperature Ionic Liquid/Polymer Composite Membranes for Chemical Separations
334g Mixed Matrix Membranes for CO2/Ch4 Seperation:Plasticization Study on Cellulose Acetate
334h Modeling and Molecular Simulation of Mixed-Matrix Membranes
Session 347 - Design and Synthesis of New Adsorbent Materials
Chair: Shuguang Deng
347a Improvement of Adsorption Applications Using High Contacting Efficiency Microfibrous Entrapped Materials
347b A
Nanostructured Chelating Adsorbent for the Capture of Gaseous Mercury:
Synthesis and Characterization
347c Effect of Dopant Addition on Phase Stability and Oxygen Sorption Properties of La-Sr-Co-Fe-O Perovskite Type Oxides
347d Removal of Carbon Monoxide and Hydrogen from Air
347e Use of Composite Activated Alumina Adsorbents for Separation of Hydrocarbons from Olefin Containing Streams
347f Moderate Temperature H2s Removal over High Specific Surface Area Sio2 Supported Zno Sorbent: Preparation and Characterization
347g Adsorption Fundamentals in Metal-Organic Frameworks from Molecular Modeling
Adsorption of H2, N2, O2, Ch4 and CO2 on an Ordered Mesoporous Carbon Material
Session 353 - Fuel Cell Membranes II
Chair: W.S. Winston Ho
Vice Chair: Santi Kulprathipanja
353a Development of Encapsulated Submicron Pd and Pd/Ag Alloy Hollow Fiber Membranes for a Membrane Fuel Processor
353b Hydrogen Purification for Fuel Cells by Carbon Dioxide Removal Membrane Followed by Water Gas Shift Reaction
353c Synthesis Gas Generation Using Ionic/Electronic Oxygen Permeable Membranes
353d Experimental Study and Thermodynamic Analysis of Steam Reforming of Methane with Membrane Reactor
353e Sorption and Transport in Polymer Electrolyte Membranes
353f Gas Transport in Poly(Arylene Ether Sulfone) Proton Exchange Membranes
353g Electro-Osmotic Transport of Water through Nafion-112 Membrane
Session 362 - Membrane Processes in Bioseparations
Chair: Wallace W.- Leung
Vice Chair: Vinay V. Vyas
362a Membrane Cascades and Intensification of Downstream Processing
362b Determining Protein Fouling Parameters from Microfiltration Test
362c Combined Models of Membrane Fouling: Development and Application to Constant Flow Microfiltration of Biological Fluids
362d Crossflow Microfiltration of E.Coli Cell Lysate Containing Inclusion Bodies of Recombinant Human Growth Hormone (Met-Hgh)
362e Minimization of Cell Migration between Flowing Blood and Concurrent Miscible Layers in a Microfluidic Environment
362f Adsorptive Depth Filters for Virus Filtration
Session 381 - Turning Whey Into Valuable Products
Chair: Jamie A. Hestekin
Vice Chair: Czarena CROFCHECK
381a Processing of “Whey-Ste" into a Value-Added Product: an Overview
381b Membrane Use for Dairy Process, Reuse - Recovery - Ethanol
381c Separation of Lactic Acid from Cheese Whey Fermentation Broth Using Cross-Flow Ultrafiltration and Nanofiltration Membrane System
381d Separation Media Derived from Whey Protein Isolate
381e Production and Separation of Galacto-Oligosaccharides from Lactose by Β-Galactosidase Immobilized on Nanofiltration Membrane in a Cross-Flow System
381f Concentration of Whey Solutions by Foam Fractionation
Session 385 - Adsorption and Sustainable Processing: I
Chair: Jeffrey R. Hufton
Vice Chair: Stefano Brandani
385a A Regenerable Adsorption System for the Removal of Carbonyl Sulfide and Hydrogen Sulfide from a Syngas Stream Using Novel Adsorbents
385b Comparison of Adsorbents for Deep-Desulfurization of Diesel
385c Applications
of Adsorption Technology for the Optimization of Processes for
Biodiesel Production
385d Comparison of Activated Carbons for Natural Gas Storage: Influence of Nonisothermal Effects and Heavy Alkanes
385e Parametric Study of High Purity O2 Three-Bed Pvsa Process for Combustion Processes
Session 386 - Advances in Liquid Separation Membranes and Applications: Part III
Chair: D. Bhattacharyya
Vice Chair: Norman N. Li
386a Fundamentals
and Applications of Pervaporation through Zeolite Membranes
(Invited Keynote Speaker)
386b Enhanced Surface Flow Membranes for Ethanol Separation
386c Mechanisms of Chemical Cleaning of Organic-Fouled Reversed Osmosis Membranes
386d High Temperature Proton-Exchange Membranes for Fuel Cells
386e Synthetic Sulfonated Polyimide Membranes for Dehydration of Isopropanol
386f Polymerization Induced Phase Separation and Its Effects on Water Uptake, Flux, and Other Properties of Crosslinked Poly(Ethylene Glycol)
386g Characterization of Sulfonated Polysulfone Membranes Modified by Ion Beam Irradiation
Session 392 - Centrifugal Field-Enhanced Bioseparations
Chair: Wallace W.- Leung
Vice Chair: Seyi A. Odueyungbo
392a Simulation of
Centrifugal Recovery of Protein in Biopharmaceutical
Production Using Atspin Simulator
392b Continuous Centrifugation of Adenovirus Infected Cell Culture Lysates
392c Steps in
Development of a Counter-Current Centrifugal Separator for
Use in Downstream Processing
392d Experimental
and Theoretical Study of Flow and Sedimentation of
Tubular Centrifuge for Bioseparation
Session 394 - Crystallization of Pharmaceutical and Biological Molecules: II
Chair: Venkateswarlu Bhamidi
Vice Chair: Christopher L. Burcham
394a Control of Polymorph Crystallization Via Quasi-Emulsions
394b Polymorph Screening Using Microfluidics
394c Polymorphic Behaviour and Morphology of an Anti-Viral/HIV Drug: Stavudine
394d Effect of Fermentation Co-Solutes on the Crystallization of Levodione
394e Chiral Resolution Via Diastereomeric Salt Crystallization
394f Using Fbrm Measurements, Fines Destruction and Varying Cooling Rates to Control Paracetamol Csd in a Batch Cooling Crystallizer
394g Direct Design of Batch Recipes and Concentration Control in Antisolvent Crystallization
Session 407 - Inorganic Membranes for Gas and Vapor Separations
Chair: Lora G. Toy
Vice Chair: Benny D. Freeman
407a Fabrication of a-Oriented Mfi Zeolite Membrane by Secondary Growth
407b Synthesis and Gas Permeation Properties of Sodalite Membranes
407c Silica and Silica-Metal Membranes for Hydrogen Separation and Membrane Reactors
407d Palladium Coated Vanadium Alloy Membranes for Hydrogen Separation
407e Directionally Dependent Transport in a Mixed Ionic-Electronic Conducting Membrane for Separating Oxygen from Air
407f CFD Analysis of Flow in Tubular Zeolite Membrane Modules
407g Gas Permeation and Separation in Zsm-5 Micromembrane Unit
Session 439 - Adsorption and Sustainable Processing: II
Chair: Stefano Brandani
Vice Chair: Jeffrey R. Hufton
439a Gravimetric Measurement of Coal Adsorption Isotherms
439b Experimental Pilot-Scale Study of Carbon Dioxide Recovery from Flue Gas Streams by Vacuum Swing Adsorption
439c Sorption Enhanced Reaction Process for Electricity Production and CO2 Capture
439d CO2 Sorbents Made by Flame Spray Pyrolysis and High Temperature Calcination
439e Kinetic Study and Modeling of the High Temperature CO2 Capture by Na2zro3 Solid Sorbent
439f Applications of Sorbents Developed Using Aerosol Process
Session 440 - Adsorption in a Hydrogen Economy
Chair: Orhan Talu
Vice Chair: Scott A. Gold
440b In-Situ Growth of Zeolites and Mesoporous Silica on Metal Substrates
440c Adsorption of Hydrogen and Methane in Metal-Organic Frameworks
440d Mechanisms of Hydrogen Adsorption in Metal Organic Frameworks
440e Hydrogen Adsorption in Self-Assembled
LI-Doped Corannulene
440f Reversible Hydrogen Storage in
Complex Hydrides
440g Reversible Chemisorption of Carbon Dioxide
Session 443 - Advances in Fluid-Particle Separations I
Chair: George G. Chase
Vice Chair: Seyi A. Odueyungbo
443a Development of a Magnetic Separator for Sequestration of Magnetic Micro Spheres Designed for Ex-Vivo Blood Detoxification
443b Magnetophoretic Size-Based Trapping and Separation of Nonmagnetic, Submicronparticles in a Microsystem
443c Filtration of Submicron Particles by Agglomerates of Nanoparticles
443d Nanofibers in Capturing Submicron Particles
443e Separation of Molybdate Catalyst from Pulp Bleaching Effluents
443f Nonequilibrium Compression Effects in the Dewatering of Fibrous Suspensions: Analysis Using Dual Porosity Dual Permeability Approach
Session 461 - Functionalized Membranes: Synthesis and Applications
Chair: David M. Ford
Vice Chair: Stephen M. Ritchie
461a Barrier Films for Cesium or Carbon Tetrachloride
461b Bimetallic
Nanoparticles Synthesis in Membrane Matrix: Nanoparticle Structure and
Reactive Properties
461c Gated Chemical Transport through Vertically Aligned Carbon Nanotube Membranes
461d CO2/C2h6 Separation Using Solubility Selective Membrane Materials
461e Polymeric Co2-Selective Membranes Containing Mobile and Fixed Carriers
461f Adsorption and Elution of Lectins by Affinity Membranes
461g Controlled-Chain
Pegma-Enhanced Cellulose Acetate Ultrafiltration Membranes for
Fouling Control
Session 470 - Particle Formation and Crystallization Processes from Liquids or Slurry
Chair: Priscilla J. Hill
Vice Chair: Patrick T. Spicer
470a Development of a Continuous Crystallization Technique to Produce Small Crystals of Pharmaceutical Compounds
470b Analysis and Optimization of Different Configurations for Preferential Crystallization
470c Crystallization in Monodisperse Emulsions
470d Use of in-Situ Instrumention to Characterise Anti-Solvent Addition Crystallization
470e Crystallization
from Aqueous Solutions of Na2co3 and Na2so4 as Related
to Heat Exchanger Fouling
470f Silver Carboxylate Nanostructure Nucleation and Growth on Agbr Crystals
470g Evaluating
the Efficiency of Ozawa Theory for the Non-Isothermal Crystallization of
N-Paraffins in Solution
Session 507 - Liquid Phase Adsorption
Chair: Gino V. Baron
Vice Chair: Armin D. Ebner
507a Competitive Adsorption of 1,5-, 1,6- and 2,6-Dimethylnaphthalene on Various Ion-Exchanged Faujasite Zeolites
507b Packing Induced Selectivity Effects in the Liquid Phase Adsorption of Alkane/Alkene Mixtures on Nay
507c Breakthrough Curves for Solid-Acid Catalyzed Liquid-Phase Alkylation Reactions
507d Effects of System Parameters and Material Properties on Productivity and Desorbent Consumption in Chiral Smb Separation
507e Preparative
Gradient Elution Chromatography for the Optimized
Separation of Ternary Mixtures
507f Batch
Preparative Chromatography Applied to the Separation of Sugars
from Cashew Apple Juice
507g Adsorption Separation of Ethanol from Water for Bio-Ethanol Production
507h An
Investigation of the Adsorption Properties of Saudi Bentonite Clay for Dyes
in Wastewater
Session 509 - Membranes for Gas and Vapor Separations
Chair: Benny D. Freeman
Vice Chair: Lora G. Toy
509a Room Temperature Ionic Liquid Membrane for Facilitated Transport of CO2
509b Mixed Gas Selectivities and Permeabilities for Carbon Dioxide/Methane Separation Using Room Temperature Ionic Liquid Membranes
509c Correlation of Structure and Function for CO2 Permeation in Polyphosphazene Membranes
509d Hydrogen Sulfide Removal with Polymer Membranes for Fuel-Cell Applications
509e Crosslinking of High Free Volume Polymers for the Separation of Organic Vapors from Permanent Gases
509f Can We Increase Flux by Patterning the Surface of a Gas Separation Membrane?
509g Theoretical and Experimental Analyses of Fiber Property Variation in Hollow Fiber Membrane Module for Permeate Purification of Oxygen from Air
Session 515 - PSA/TSA
Chair: Jose P. Mota
Vice Chair: Roger D. Whitley
515a A Numerical Method for the Accurate Simulation of Fast Cyclic Adsorption Processes
515b Psa Cycle
Selection for Binary Gas Separations – Dual Reflux, Rectifying
or Stripping Cycles?
515c Development of a High Recovery O2 Pvsa System
515d Concentration
and Recovery of Carbon Dioxide at High Temperature
with Heavy Reflux Psa Cycles
515e Prepurification of Air Using an Advanced Thermal-Pressure Swing Adsorption (Tpsa) Cycle
515f Gas
Separation by a Novel Hybrid Membrane/Pressure Swing Adsorption
Concept: Case Studies
515g Modeling and Simulation of a Combined Reactor/Pressure Swing Adsorption Unit for Isomerization of a Mixed Feed of Pentanes and Hexanes
515h Propylene Purification by Applying & Pi - Complexation Adsorbent
Session 516 - Particle and Cell Separations in Bioprocessing
Chair: Ray M Collins
516a A Rational Approach to Design an Efficient Primary Recovery Process for a Recombinant Protein from Microbial Biomass
516b Separation of (Sub-)Micron Bioparticles by Selective Flotation
516c Broth
Conditions Determining Specific Cake Resistance during Microfiltration
of Bacillus Subtilis
516d Optimum Technology for Separating Biomaterials from Extracts
Session 529 - Advances and Case Studies in Crystallization and Post-crystallization Processing
Chair: R. Dennis Vigil
Vice Chair: Joe Schroer
529a Overview of
Modeling Approaches to Better Understand and Control
Crystallization Processes
529b Simulation of Mixing Effects in Antisolvent Crystallization Using a Coupled CFD-Micromixing-Pbe Approach
529c CFD Simulations for Scale-up of Anti-Solvent Crystallization Process
529d The Application of Cluster Size Distribution Methods in Polymer Crystallization Kinetics
529e Optimizing Powder Behavior through Crystallization Engineering
529f Concentration-Control of Anti-Solvent Crystallization Using Atr-Ftir
529g Control of Api Powder Properties Via Agitated Drying
Session 532 - Advances in Fluid-Particle Separations II
Chair:
Vice Chair: Seyi A. Odueyungbo
532a Design of Hydrocyclone Separation Equipment Using CFD Coupled with Optimization Tools
532b Analysis of Droplet Coalescence in Emulsions Subjected to Acoustic Fields
532c A Scale-up Study of Mstlflo Process for Oily Water Treatment
532d Experimental Characterisation of Wire Mesh Demisters
532e Drag Correlation of Drop Motion on Fibers
532f Coalescence Filter Model Performance of Glass Fiber Media with and without Nanofibers
532g Solid/Liquid Separation Processes in Gas-to-Liquid Systems
Session 543 - Extractive Separations
Chair: Scott Husson
Vice Chair: Vincent Vanbrunt
543a Trays Versus Packing. Selection of the Optimal Extractor
543b Motion of Charged Drops in a Non-Newtonian Liquid-Liquid System
543c Solubility and Diffusion of Gases in Ionic Liquids
543d Predicting Gas Diffusivity in Room Temperature Ionic Liquids
543e Novel Solvent
Resistant Hydrophilic Hollow Fiber Membranes for Membrane
Solvent Back Extraction
543f Mixing Size Control and Mass Transfer Performance in a Micromixing Process
543g Enantioseparation of D,L-Tryptophan with a New Chiral Selector through Solvent Extraction
543h Separation of Metal Ions by a Column Packed with Microcapsules Containing Tricaprylmethylammonium Chloride and DI-2-Ethylhexyl Phosphoric Acid
Session 24 - Fundamentals of Fluidization I
Chair: T.C. Ho
Vice Chair: Bruce D Hook
24a A New Pulverized Biomass Ulitization Technology
24b Transient 3-Dimensional Behavior of Gas-Solid Fluidization Measured Using Electrical Capacitance Volume Tomography (Ecvt)
24c CFD Simulations of Gas Fluidized Beds Using a Revised Formulation of the Multi-Dimensional “Particle Bed Model"
24d Homogeneous Gas Fluidization: Kinematic and Dynamic Wave Velocities, Particle Mobility and Apparent Suspension Viscosity
24e The Hydrodynamics of a Rotating Fluidized Bed
24f The Effect of Gas-Solids Dispersion on a Two Fluid Model of a Transport Gasifier
24g Residence Times in Fluidized Beds with Secondary Gas Injection
Session 62 - Fundamentals of Fluidization II
Chair: Isaac K. Gamwo
Vice Chair: Ben Glasser
62a Kinetic Theory Based CFD Simulation of Turbulent Fluidization of Fcc Particles in a Riser
62b Three-Dimensional Simulation of a Single Bubble in a Rectangular Gas-Solid Fluidized Bed with a Central Jet
62c Fluidization of Cohesive Particles
62d Computational
Validation of the Glicksman Scaling Laws Using Gas/Solids Fluidized
Bed Simulations
62e Numerical Simulations of Hydrodynamic Behaviors in Conical Spouted Beds
62f Detailed Measurements of Flow Dynamics inside a Dense Gas-Solids Fluidized Bed
62g Towards the CFD Modelling of Bimodal Gas Fluidized Beds
Session 66 - Gas Phase Synthesis of Particles I
Chair: Amit Limaye
Vice Chair: Srinivas Vemury
66a Thermal Decomposition Mechanism of Nickel Oxalate in an Aerosol Flow Reactor
66b Co-Synthesis of H2 and Zno Nanoparticles by in-Situ Zn Aerosol Formation and Hydrolysis
66c Synthesis of Tellurium Dioxide Nanoparticles by Spray Pyrolysis
66d Ultrafine Particles for Catalytic Applications Made by Spray-Pyrolysis
66e Synthesis of Iron Oxide Nanoparticles in Counterflow Diffusion Flame Reactor
66f Biodegradable, Nanoparticulate Polymer Fillers
66g Generation of Tailored Microparticles by Photopolymerization of Monodisperse Droplets
66h Synthesis of Binary Metal Nanoparticles of Ru-Ni with Core and Shell Structure
Session 84 - Solids Handling and Processing
Chair: Bruce D Hook
Vice Chair: George E. Klinzing
84a Modeling of Heat Transfer in Granular Flow in Rotating Vessels
84b Parameter Characterization for Drying of Porous Spherical Particles
84c Scaling of
the Adhesion between Particles and Surfaces from Micron-Scale
to the Nanometer Scale
84d A Method for Predicting Hopper Flow Characteristics of Unconfined Cohesive Powders
84e Particle Attrition during Dense and Dilute Phase Pneumatic Conveying
84f Electrostatic Phenomenon in Gas-Liquid-Solid Fluidized Beds
84g Experimental Investigation of Granular Electrostatics and Ignition Hazard in a Pneumatic Conveying System
Session 115 - Characterization of Engineered Particles and Nano-Structured Particles
Chair: Gregory Beaucage
Vice Chair: Mark Bumiller
115a Aerosol Synthesis of Low Density High Surface Area Aerosol Gels
115b Experimental and Computer Simulation Studies of the Mechanical Behavior of Nanoparticle Chain Aggregates
115c Phase Composition of Fumed Alumina Nanoparticles
115d Characterization
of Nanoparticle Composition and Reactivity by Single Particle
Mass Spectrometry
115e Real Time
Measurement of Sintering Rates by Tandem Mobility Dma and an
Electrospray System
115f Dynamics of
Particle Formation and Growth in Spray Flame Pyrolysis
Using in Situ X-Ray Scattering
115g Size Distributions of Non-Spherical Particles from Chord Length Measurements: How to Account for Orientation Bias Due to Flow
Session 117 - Fred Thomson Memorial Session: Industrial Perspective of Solids Processing
Chair: Shrikant Dhodapkar
Vice Chair: Tim Bell
117a Fred Thomson and the Role of the Technology Specialist in Industry
117b Thoughts on Engineering, Design and Start-up of Solids Processing Plants
117c Scale-up of Size Enlargement Processes: a Pharmaceutical Perspective
117d Process Scale up or Why I Never Have the Proper Data
117e Road Map for Successful Start-up of Bulk Handling Facilities
117f Closing Remarks
Session 121 - Fundamentals of Fluidization III
Chair: Maureen A. Howley
Vice Chair: Seyi A. Odueyungbo
121a Pressure Pulsation in Vibrofluidization of Fine Powders
121b Instabilities in Liquid Fluidization Systems
121c The Kinematic Theory of Fluidized Bed Expansion and Contraction
121d A Local Transient Approach to Monitoring Fluidization Quality
121e Novel Technique to Optimum Catalyst Size Selection for Slurry Bubble Column Reactors
121f Particle Size Monitoring in a Fluidized Bed Using Pressure Fluctuations
121g Some Applications of Acoustic Emission in Fluidized Bed
121h Integration of Ect Measurements with Hydrodynamic Modelling of Conventional Gas-Solid Bubbling Bed
Session 159 - Circulating Fluidized Beds
Chair: S. B. Reddy Karri
Vice Chair: Clay R. Sutton
159a Mp-Pic Simulations Dense-Bed Reactors: Chlorinators and Fluid Cokers
159b Solids Fractions and Flow Characteristics in a Cfb as Measured with a Fiber Optic Probe
159c Particle Velocity Measurements in a Circulating Fluidized Bed
159d Radial and Axial Profiles of Solids Loading in a Gas-Solid Circulating Fluidized Bed
159e Wavelet Analysis of a Circulating Fluidized Bed Optical Probe Data
159f A Model for Axial Voidage Profile in Risers
159g Experimental and Computational Study of T- and L-Outlet Effects in a Dilute Circulating Fluidized Bed Pilot Riser
159h Application of Drift-Flux Model to Phase Holdup in Liquid-Solids Circulating Fluidized Bed
Session 209 - Computational and Numerical Approaches to Particle Flow
Chair: Jennifer S. Curtis
Vice Chair: Pedro E. Arce
209a Coarse-Graining of Two-Fluid Models for Fluidized Gas-Particle Suspensions
209b Preconditioning for the Simultaneous Solution of Gas-Solid Flows
209c Consistency of Fully Developed and Periodic Simulations in Gas/Solids Flow in a Riser
209d Simulating the Hydrodynamics of Spouted Beds Using a Continuum Formulation
209e Modeling of Slow-Frictional Flow in CFD Eulerian Framework
209f Granular Attrition as a Diffusion Phenomenon
209g Rotating Fluidized Bed an Efficient Polymerization Reactor
209h Numerical Simulation of Heat Transfer in a Rotary Kiln
Session 284 - Transport in Fluidized Beds
Chair: Ray Cocco
Vice Chair: Sofiane Benyahia
284a Particle
Injection and Mixing Experiments in an One Quarter Scale Model
Bubbling Fluidized Bed
284b Comparison of the Performance of a Conventionally-Heated and a Microwave-Heated Fluidized Bed Mercury Desorber Employing a Mass Transfer-Based Kinetic Model
284c A CFD Study of Coal Gasification Using Eulerian-Granular Multiphase Model
284d A Hybrid Lagrangian-Eulerian Approach in Simulating Gas-Solid Flows Consisting of Multiple Solid Phases
284e Modeling and Design of a Spray Dryer for the Manufacture of Hollow Micro-Particles
284f Hydrodynamic Correlations with Experimental Results from Cold Mockup Spouted Beds for Advanced Fuel Particle Coating
284g Case Study: Optimization of an Industrial Fluidized Bed Drying Process for Large Geldart Type D Nylon Particles
284h A Model for Gas to Particle Mass Transfer in Risers
284i On the Effect of Particle Size Distribution in Fluidized Bed Simulations
Session 287 -
Particle Technology Forum Poster Session
Chair: Joseph McCarthy
Vice Chair: Shrikant Dhodapkar
287a Studies to Investigate Variables Affecting Coating Uniformity in a Pan Coating Device
287b Error Analysis of Focused Beam Reflectance Measurements
287c Dynamic Model of the Riser in Pilot-Scaled Circulating Fluidized Bed
287d Granular Attrition Effect on the Electrostatic Behavior in a Pneumatic Conveying System
287e A One-Dimensional Model of Gas-Solids Flows in the Acceleration Zone of a Cfb Riser
287f Optical Effects of Nano-Thick Coatings on Particles of the Core-Shell Type
287g Particle Aldtm Based Ultrafast
Electrical Surge Suppression Devices
287h Fractal Gelation or Self-Preservation
287i Approaches to Non-Brownian Particle Migration in a Stirred Tank Flow
287j Polymer
Coating of Submicron Particles from Sas Process and
Characterization Using Tem-Eels
287k Particle Dynamics in Flame Synthesis of Materials
287l Near Infrared Optical Transduction on Single-Walled Carbon Nanotubes
287m Voidage Instabilities in Liquid Fluidized Beds
287n Effects of Preparation Condition on Morphology of Fine Nickel Particle
287o Design and Development of a Capacitance Transducer for Airborne Particulates
287p Towards the Optimal Reconstruction of a Distribution from Its Moments
Session 300 -
Agglomeration, Granulation and Particle Formation Processes
Chair: Paul Mort
Vice Chair: Rebecca L. Carrier
300a Multidimensional Modeling of Granulation
300b Micromechanical Properties of Model Intragranular Bridges of Pharmaceutical Excipients
300c Determination of the Coalescence Probability of Wet Granules by Mesoscale Modeling
300d A Micro-Mechanistic Investigation of the Effects of Binder Surface Tension in Pharmaceutical Granulation
300e Adhesion Force and Wetting Behaviour of Las Acid Bridges: A Comparison of Different Neutralisation States in Relation to Detergent Granulation
300f Wet Granule Breakage in High Shear Mixer Granulation
300g Discrete Element Method Application for Verification of Kinetic Theory of Granular Flow in a High Shear Mixer
300h Use of Lasentec Fbrm in-Process Particle Sizing Pat Technique to Study Top- and Bottom-Spray Fluid Bed Granulation Processes
Session 315 - Dynamics and Modeling of Particulate Systems I
Chair: Joerg Theuerkauf
Vice Chair: Ben Glasser
315a Plane Shear Flow of Cohesive Granular Materials
315b Gelation or Self-Preservation during Turbulence-Induced Coagulation
315c Molecular Dynamics Simulation of Titania Nanoparticles
315d Analysis of
Local and Global Structure during Densification of Non-Spherical
Particulate Materials
315e An Investigation of the Effect of Process Conditions on the Fluidization Behaviour of Gas Fluidized Beds Linked with Rheological Studies
315f The Effect of Particle Shape on Granular Stress
315g Numerical Approach for Solving Dynamics of Dense Granular Flows
315h Choosing an Objective Function for Seeded Batch Crystallization
Session 323 - Functional Nano-particles and Applications I
Chair: George Fotou
Vice Chair: Lutz Madler
323a Functionalized Monodisperse Magnetic Nanoparticles
323b Synthesis and Functionalization of Magnetite (Fe3o4) Nanoparticles for Cancer Treatment
323c Droplet and Particle Dynamics during Flame Spray Synthesis of Nanoparticles
323d Synthesis and Characterization of Biocompatible Metal Nanoparticles
323e Nanostructured Polymeric Materials for Biomedical Applications
323f Mechanical and Gas Barrier Properties of Styrene-Butadiene Rubber (Sbr) Nanocomposites Containing Organoclays and Carbon Black
323g Fabrication and Electrical Characterization of Ultrafast Transient Surge Suppression Devices Based on Ald Surface Modified Varistor Materials
Session 354 - Functional Nano-particles and Applications II
Chair: Lutz Madler
Vice Chair: George Fotou
354a Synthesis of Non-Oxidic Nano Scale Materials Using Flame Technology
354b Surface Modification of Ceramic
Nanoparticles Via Atomic Layer Deposition
354c Visibly
Transparent and Radiopaque Inorganic Organic Composites from
Flame-Made Mixed-Oxide Fillers
354d Benign Nano-Thin Film Composite Particles for Protection from Uva/Uvb - Rays
Session 364 - Mixing and Segregation
Chair: James F. Gilchrist
Vice Chair: Joseph McCarthy
364a Cluster Model of Particle Segregation in Vibrated Granular Media
364b Segregation during Hopper Discharge: a DEM and Experimental Study
364c Segregation under Chaotic Flow in 2d Granular Systems
364d Modeling
Granular Mixing Processes Utilizing a Hybrid DEM-Compartment
Modeling Approach
364e Mixing and Segregation of Slurries for Catalyst Production
364f Segregation Potential in Pharmaceutical Powder Blends: from the Bench to Production
Session 369 - Population Balance Modeling for Control of PF Processes: Nucleation, Aggregation and Breakage Kernels
Chair: Edward P. Gatzke
Vice Chair: Richard B McClurg
369a Comparison of
Models for Coarse Particle Shape Evolution during Attrition
in a Stirred Vessel
369b Population
Balance Equation Modeling of Drop Size Distributions in
Turbulently Prepared Emulsions
369c Mathematical Modeling of Wet Granulation:
369d Constraints on the Kernel of the Multiple Fragmentation (Breakage) Equation
369e Transient and Asymptotic Behavior of the Binary Breakage Problem
369f Bivariate Applications and Extensions of the Quadrature Method of Moments
369g Population
Balance Modeling of Comminution Processes: Implications of a
Nonlinear Theory for Practice
Session 382 - PTF Baron Award Lecture
Chair: Alan W. Weimer
382a Challenges in Quantitative Analysis of Particulate Flows
Session 399 - Dynamics and Modeling of Particulate Systems II
Chair: Benjamin J. Glasser
Vice Chair: Joerg Theuerkauf
399a Modelling of Solid Stress in Gas-Solid Flow Systems
399b A
Computational Study of the Various Flow Regimes in Pneumatic Conveying of
Granular Materials
399c Simulation of Pneumatic Dense Phase Conveying Using the Discrete Element Method
399d The Unsteady Drag Force on a Cylinder Immersed in a Dilute Granular Flow
399e Granular Flow of Wet Solids in a Four Bladed Mixer
399f Flow-Induced Dilation of Fine Powders in a Rotating Drum
399g Model of Wet Particle Collisions and Its Application to Dilute Wet Particulate Systems
Session 403 - Functional Nano-Particles and Applications III
Chair: Karsten Wegner
Vice Chair: Yakov Kutsovsky
403a Modifying Bandgap of Tio2-Based Nanoparticles by Cation Doping
403b Coating
Nanoparticles by Atomic Layer Deposition in a Rotary Fluidized
Bed: Al2O3 Ald on Zro2
403c Microfluidic Synthesis and Surface-Engineering of Colloidal Nanoparticles
403d Flame Synthesis of Doped Zno Nanorods
403e Tuning the Reactivity of Nanoparticles and Nanoparticle Mixtures
403f Organic Monolayer Deposition on Aerosolized Silicon Nanoparticles
Electrochemically Active Nanoparticles Made by Flame Spray Pyrolysis
Session 411 - Modeling and Scale-Up of Nano-Particle Processing
Chair:
Vice Chair: Silvina Tomassone
411a A Comparison of Deterministic Population Balance Equations and StochasticMonte-Carlo Approaches for Modelling the Particle Precipitation in Microemulsions
411b Competition
between Mixing and Gelation in Continuous
Processing of Nanoparticle Dispersions
411c Gas Entrainment Measurement in Spray Flames for Particle Synthesis
411d Controlling
the Processing Behavior of Silica Agglomerates Using a
Thermo-Responsive Binder
411e Dynamic Optimization of Hybrid Discrete/Continuous Particulate Processes
411f Fluidization of Nanoparticles in a Rotating Fluidized Bed
411g Quenching of Growth of Asa Crystal Surfaces by Adsorption of Various Surfactant Molecules Using Molecular Dynamics Simulations
Session 473 - Processing and Safety of Energetic Materials
Chair: Dilhan M. Kalyon
Vice Chair: Lilia Mastov
473a Development of Flow Instabilities during the Extrusion of Energetic Materials: Mathematical Analysis and Experimental Results
473b Rheological Characterization of Nasa Propellants and Modeling/Simulation of the Mixing Process for Scale-up to Production
473c Analysis of the Fundamentals of Co-Extrusion Process for Co-Extrusion of Fast/Slow Burn Composite Grains
473d Development of a Co-Extrusion Process for Propellant Manufacture
473e Rheological Characterization of Nc Gels and Development of Processing Simulants
473f Twin Screw Extrusion Processing of Double Base Propellant
Session 474 - Purification, Separation, and Manipulation of Nano-Particles
Chair:
Vice Chair: Benjamin C. Fuchs
474a Nanoseparations – State of the Art and Future Needs
474b Separation of Functionalized Single-Walled Carbon Nanotubes Via Gel Electrophoresis
474c Nano Colloid
Coating of Micro-Porous Electrode Membrane by
Precision Electrospray Deposition
474d Size Selective Fractionation of Nanoparticles Using the Tunable Solvent Properties of Co2 Gas Expanded Liquids
474e Nucleation
and Growth Kinetics for the Nanoparticle Precipitation of
Barium Sulfate in Microemulsions
Session 511 - Nano-Energetic Materials
Chair: Jan A. Puszynski
Vice Chair: Hendrik J. Viljoen
511a The Development of Energetic Nanocomposites for the Warfighter
511b Optimization of the Selection of the Extruder Type, Geometry and Operating Conditions for the Processing of Nano-Energetic Materials Based Fem Analysis of the Process
511c The Effect of Heating Rate on the Reaction Kinetics of Nanoscale Aluminothermic Reaction
511d Investigation of Reaction Mechanisms and Combustion Characteristics of Nanothermites
511e A Reaction Model for Plasma Coating of Nanoparticles in Hydrocarbon Plasma
Session 524 - Supercritical Fluids for Food and Pharmaceuticals
Chair: Rajesh Dave
524a Totally Predictive Models for Supercritical Fluid Extraction of Natural Products
524b Rapid Expansion of Supercritical Solution with Solid Cosolvent (Ress-Sc) Process for Particle Formation: Pharmaceutical Nanoparticles
524c Fabrication of Controlled Release Devices for Anticancer Agents Using Supercritical Antisolvent Method
524d Denaturation of Egg Yolk Proteins during Processing with near-Critical Dimethylether
524e Influence of Supersaturation and Growth on Particle Size and Morphology in High Pressure Co2 Antisolvent Process
Session 542 - Energetic Materials: Environmental and Life Cycle Issues
Chair: Charles R. Painter
Vice Chair: Doris A. Anders
542a Development of Physico-Chemical and Biological Process for the Treatment of Pink Water and Perchlorate at Picatinny Arsenal
542b Green Armaments Technology - Energetics Forensics Initiative
542c Environmentally-Friendly Replacement for Mercurous Nitrate Test of Copper Alloys
542d Materials of
Evolving Regulatory Interest Team: Dod’S Approach
to Moving beyond Compliance
542e Phytoremediation of Energetic Materials (Dnts and Rdx) Using Arabidopsis Thaliana
The session
papers for sessions 01, 03, 31, 47, 182, 312, 424 and student poster sessions
90, 91, 92, 93, 94, 95, 96, 97 were not available at time of production
Session 4 - Meet the Faculty Candidate Poster Session
Chair: Sundararajan V. Madihally
Vice Chair: Dana E. Knox
4a First-Principles Screening of Alloys for Heterogeneous Catalysis
4aa Synthesis and Controlled Clustering of Magnetic Nanoparticle Suspensions
4ac Sustainable Technologies for Biomaterials from Renewable Resources
4ad Molecular
Dynamics Investigation into the Influence of Anionic and Zwitterionic Membrane
Interfaces on Structure of Antimicrobial Peptides, and Implications on
Antimicrobial Properties
4ae Thermodynamic and Kinetic Modeling of Protein Phase Transition Related to Diseases and Drug Development through Control of Protein-Protein Interactions
4af Reaction Engineering, Process Design, and Catalyst and Material Development Research on the Utilization of Biorenewable Resources for Bioenergy and Bioproducts
4ag Crystal Nucleation in Levitated Polyethylene Oxide
4ah Flow-Induced Microstructure of Nanoparticles in Multiphase Systems: Processing, Characterization, and Applications
4ai Nanoparticles for Pharmaceutical and Electronic Applications
4aj High-Throughput
Time-Series Metabolomic Analysis of a Systematically
Perturbed Plant System
4ak Advanced Sulfonated Polyarylenethioethersulfone Polymer and Copolymer Membranes for Fuel Cell Application
4al Strategies for Overcoming Drug Resistance
4am Dry Powder Aerosols for Therapeutic Drug Delivery
4an From Process Systems Engineering to Systems Biology and Synthetic Biology
4ao Development
and Application of Novel Pattern Discovery Techniques for
Problems in Biochemical Engineering
4ap Customized Bioengineering in Inhomogeneous Environments
4aq Directed Evolution of Proteins for Biomedical Application
4ar Interfacial
Effects and Properties of Ultrathin Polymer Films: from Nanofabrication
to Large-Area Displays
4as High-Throughput Time-Series Transcriptional Profiling Analysis of a Biological System Subjected to Multiple Perturbations: a Case Study in Systems Biology
4at Simulations
of Materials Systems with Multiple Coordination States Using a
Reactive Force Field
4av Directed Self-Assembly of Block Copolymers on Nanopatterned Surfaces
4aw Nanocarriers for Controlled Delivery of Therapeutic Agents
4ax Double Sided Thin Film Membranes
4ay Solution-Phase Growth of Nanostructures
4az Enantioselectivity on Naturally Chiral Copper Surfaces
4ba Systematic Approaches to the Protein Engineering of Highly Specific Receptor-Ligand Pairs
4bb Nanoporous
and Nanostructured Materials for Biomimetic Sensor
and Hydrogen Storage Applications
4bc Multi-Scale Modeling of the Actin Filament: from Allostery to the Elasticity of Cytoskeleton
4bd Exploring Physiological Landscapes for Cell and Metabolic Engineering
4be Regulon Prediction and Coregulation Patterns in Clostridium Acetobutylicum
4bf Automatic Design of Biofluidic Microcircuits
4bg Assembly and Investigation of Biomimetic Colloids
4bh Morphology and Structure in Polymer Nanocomposites and Compound Droplets
4bi Highly Responsive Gels Via Self-Assembly of Block Copolymers in Liquid Crystal Solvent
4bj Engineering Colloids – from Interparticle Interactions to Advanced Materials Assembly
4bk Monte Carlo Simulations to Study Polymorphism and Relative PolymorphStability in Solids
4bl Optimization
as a Tool for Predictive Modeling of Biological Systems and
Mining of Large-Scale Data Sets
4bm Computer Simulation Studies of Pattern Recognition in Biomimetic Polymers
4bn Hydrogen-Induced Crystallization of Diamond-Cubic Semiconducting Materials
4bo Polyolefin-Organoclay Nanocomposites: Morphology, Properties and Applications
4bp Smart Nanotechnology in Biomaterials, Sensors, Actuators and Textiles
4bq Engineering Combustion for Gas Release: Emergency Oxygen Generators for Aircraft and Hydrogen Generation for Fuel Cells
4br Combinatorial Initiated Chemical Vapor Deposition for Polymer Thin Film Discovery
4bs Effects of Yeast Elicitor on Secondary Metabolism and in-Vitro-Translated Protein Pattern of Eschscholtzia Californica Cell Culture
4bt Micro Fuel Cells for Portable Applications
4bu Synthesis and Applications of Nanostructured Materials
4bv Modeling, Analysis, and Design in Biological Systems Using Engineering Approaches
4bw Regulatory Networks in Escherichia Coli: Chemogenomic-Based Identification of the Nitrogen Oxide Response and Stochastic Modeling of Pap Operon Regulation
4bx Low Temperature Polymer Nanofabrication Using Carbon Dioxide and Its Applications to Tissue Engineering
4by Monte Carlo Simulation Study of Binary Hard Sphere Crystallization
4bz Self-Assembly
of Functional Structures and Devices for Electronic
and Biomedical Applications
4c Modified Absorption Isotherm Model for Aqueous Electrolytes
4ca Multiscale Elucidation of Structure-Properties Relations for Molecular Transport in Polycrystalline Thin Films
4cb Self-Assembly of Anisotropic Tethered Nano Building Blocks
4cc Development of Composite Membrane Electrode Assemblies (Cmeas) for Higher Temperature Proton Exchange Membrane Fuel Cells
4cd Crystal Morphology Considerations in Processing of Pharmaceutical Drugs: a Computer Aided Molecular Design (Camd) Approach
4ce Studies in Reaction Kinetics, Density Functional Theory, and Catalysis
4cf Novel Polymeric Networks for on-Chip Electrophoretic DNA Purification from Cell Lysate and High-Performance DNA Separations
4cg Analysis and Optimization of Cellular Networks: a Systems Approach
4ch Surface Engineering of Micro and Nanoparticles
4ci Mass Transport through Polymer: from Theoretic to Experimental
4cj Composite
Nanostructures: Protein and Nanoparticle Arrays Templated in
Block-Copolymer Mesophases
4ck Beyond Hydrogen and Methanol - Development of Direct Ethanol PEM Fuel-Cell Systems
4cl Microfluidic Systems for Colloidal Materials Processing
4cm Epidermal Growth Factor-Mediated Proliferation Requires Tcf/Lef Signaling
4cn Protein
Engineering by Single or Multiple Site-Specific Incorporation of Nonnatural
Amino Acids in Vivo
4co New Fabrication Methods of Micro/Nanodevices: Use of Wet Stamping Techniques
4cp Molecularly Designed Mucoadhesive pH Responsive Tethered Biomaterials and Their Use in Spatially Controlled Therapeutic Delivery
4cq Lipid Assemblies in Bioengineering: Model Systems to Examine Bioaccumulation, Solvent Toxicity, and Membrane Compartmentalization
4cr Comprehensive Analysis of Metabolic Pathways through the Use of Multiple Isotopic Tracers
4cs Effect of Site-Isolation on the Preparation and Performance of Silica-Immobilized Cgc-Inspired Olefin Polymerization Catalysts
4ct Collision between a DNA Replication Fork and an RNA Polymerase TernaryComplex
4cu Microfluidics for Biomolecular Studies
4cv Functionalization and Transport of Nanoparticles
4cw Study and Utilization of Microscale Phenomena for Operation of Microscale Devices and High-Temperature Microreactors
4cx Biodegradable Scaffolds in Tissue Engineering
4cy Nanostructured Composites for Energy Generation from Renewable Hydrocarbons
4cz Biomolecular Engineering from Stem Cells to Neurons
4d Global Optimization of Dynamic Systems
4da Computational Studies of Activated Processes in Complex Systems
4db Design, Synthesis, and Characterization of Functional Polymers, Surfaces, and Interfaces
4dc Chemical Separations Based on Spatially Controlled Phase Transformations in Thermotropic Liquid Crystalline Materials
4dd Systems
Engineering Approaches to the Study of Nano-Scale Devices
and Biological Systems
4de Electrically Induced Pillar Arrays Formed Using Photocurable Materials
4df Density Functional Theory Studies of Acid Catalysis & Electrocatalysis
4dg Advanced Integrative Approaches for Designing and Constructing Control Circuits in Synthetic Biology
4dh Controlled Radical Polymerization on a Chip
4f Novel Single-Dose Controlled-Release Vaccine Carrier with Tailored Micro/Nanostructure
4g Molecular Simulation of Nanostructured Materials and Their Use in Storage/Separation of Hydrogen, Hydrocarbons, Aromatics, and Biomolecules
4h Leveraging Large-Scale Transcriptional Analysis in Cell Culture Engineering
4i Protection Schemes for Extreme
Ultraviolet Lithography (Euvl) Masks in
Low Pressure Environments
4j Development of Corrosion Resistant Implant Materials Using Biocompatible Thin Films
4k Optimization of Insitu Chemical Oxidation
4l From Synthetic to Natural Colloidal Biomaterials
4m Slithering Polymers and Migrating Cells: Application of Computational Methods to Problems in Polymer Physics and Cell Organization
4n Ac Electric Field Induced Forces on Colloidal Particles near a Planar Electrode
4o Next Generation Dynamic Optimization
4p Advanced Strategies for the Solution of Structured Dynamic Optimization Problems Using Interior Point Methods
4q Studying Single Proteins at Interfaces Towards the Development of Integrated Systems
4r An Integrated Approach to Catalytic Systems
4s Cirse: a Novel Solvation Energy Potential for Simulation and Design of Biomolecules
4t Protein Aggregation in the Pathogenesis of Amyloid Diseases
4u Controlling the Motion of Cells along Compliant Polymeric Substrates
4v Multi-Scale and Multi-Functional Microfabrication of Nanostructured Materials
4w Density Functional Theory Studies of Acid Catalysis and Electrocatalysis
4x Microfluidic Devices for Protein and Pharmaceutical Crystallization Applications
4y Functional Elastomeric Scaffold Development for Tissue Engineering
4z Molecular Modeling of Peptides Crossing the Cell Membranes
Electrokinetic Mass Transport Control in Gels Via Immobilized Nanoparticle Pumps
Bioengineering of Polypeptides and Nanoscale Assemblies for Cancer Cell Destruction
Session 32 - National Student Paper Competition
Chair: Douglas K. Ludlow
Vice Chair: William G. Pitt
32a Removal of Ammonia from Semiconductor Wastewater
32b Examining Rhodium Catalyst Complexes for Use with Conducting Polymers Designed for Fuel Cells in Preparing Biosensors
32c Transcription of Type II Collagen in Engineered Cartilage
32d Mobility and in-Situ Aggregation of Charged Microparticles at Oil-Water Interfaces
32e Feasibility of Electrolyzing Ammonia Effluents for the Production of Hydrogen
32f Design and Fabrication of Micromachined Sensor Platforms
32g Novel Measurement and Modeling of in Vivo Oral Drug Absorption Rate in Rats
32h Design of a Fuzzy Logic Control System for Interacting Tanks
32i Reaction -Diffusion Modeling of Metabolic Processes
Session 37 - Poster Session: Educational Software Demonstrations I
Chair: Kevin D. Dahm
Vice Chair: Douglas Cooper
37a Remote Experimentation in Unit Ops and Controls
37b Using Visualization in the Process Control Curriculum
37c Development of Mrdsim, Multiphase Reactor Design Simulator
37d Software for Chemical Reactor Engineering
37e A Software Program for Chemical Reactor Engineering
37f Real Laboratories at a Distance
37g Molecular Simulation Using a Graphical User Interface
37h A Software Program for Preparative Ion-Exchange Chromatography
37i Superpro Designer: an Interactive Software Tool for Designing and Evaluating Integrated Chemical, Biochemical, and Environmental Processes
37j Prosec: a Process Security Analysis Tool for Chemical Engineering Education
37k Computational Tools to Understand Liquid-Vapor Equilibrium for Undergraduate Students
37l Teaching Molecular Thermodynamics with Cosmotherm
37m Polymath 6.0 - a Significant New Release
37n New Audio-Visual Presentation Software for Internet and Pc
Session 41 - Statistics in the ChE Curriculum
Chair: S. Scott Moor
41a Computer
Facilitated Teaching of Classical Mathematical
Methods – Perturbation Techniques
41b Integrating Engineering Statistical Analysis into the Curriculum: a Hands-on Approach Using Catsup Rheology Measurements
41c A Graduate Elective in Statistical Methods for Mathematical Model Building
41d Extensive
Utilization of the Linear Least Squares Method for the Unit
Operations Laboratory Class
Session 61 - Free Forum on Engineering Education I
Chair: Douglas K. Ludlow
Vice Chair: Timothy M. Raymond
61a Teaching Generic Skills through Engineering Competition Design
61b Learning Technical Writing Skills through Peer Review: Use of Calibrated Peer ReviewTm in Unit Operation Lab
61c Teaching
Chemical Engineering within a General Engineering Program
at a Liberal Arts College
61d The Transport Cup
61e Chem-E-Car Experiments in Unit Operations Laboratory
61f A Chemical Engineering Competition for Middle and High School Students
61g A Homemade Sliderule as a Manipulative Study Aid for Chemical Reactor Design
61h Operability in Undergraduate Chemical Engineering Education
61i Chemical and Paper Engineering and Technology Workshops for K-12 and Community College Educators
Session 98 - Poster Session: General Papers (Students)
Vice Chair: Christopher Williams
98a Modelling of Bubble Growth in Tissues during the Decompression Sickness
98b An Experimental Study of Elliptical Liquid Bridges
98c Structure and Surface Energy of Ligands-Protected Nanoparticles in Polymeric Solutions by Density Functional Theory
98d Explicit Phase Equilibrium Calculations from Cubic Equations of State
98e Graduate Thesis and Peer-Reviewed Articles: Any Efficient Connection?
Session 118 - Free Forum on Engineering Education II
Chair: Timothy M. Raymond
Vice Chair: Douglas K. Ludlow
118a Pillars of Chemical Engineering: an Integrated Curriculum
118b Troubleshooting in the Engineering Curiculum: an Integrated Approach in a Process Fluids Transport Course
118c Effective Integration of Coursework: Equilibrium Thermodynamics as a Bridge from Material and Energy Balances and Mass Transfer to Design
118d Plant Design Project: Biodiesel Production Using Acid-Catalyzed Transesterification of Yellow Grease
118e Looking to the Unit Operations Laboratory as a Source of Chemical Engineering Design Projects
118f The Catalytic Pellet: a Rich Learning Environment for Scaling
118g Challenges in Teaching Chemical Engineering Capstone Design
118h A Simple See-through Extruder to Teach Principles of Polymer Melt Extrusion
118i Chemical Engineering High School Student Recruitment Program
Session 145 - Poster Session: Engineering Education
Chair: David J. Dixon
145a Modeling, Analysis and Tuning Tools for Teaching Process Dynamics and Control
145b Solving Mass Transfer Problems on the Computer Using Mathcad
145c Quantifying
and Characterizing Active Learning in the Research Communications
Studio Model
145d An Application of Aspen Software in Undergraduate Thermodynamics
145e A Chemical and Biopharmaceutical Engineering Track
145f Improving Performance of Student Teams through Exploring Learning Preferences
145g Web-Based, Interactive Simulation for Teaching Engineering Economics
145h Understanding Binary Mixture Properties through 3d Phase Diagrams
145i Teaching Thermodynamics through Software Development
145j Problem Based Learning (Pbl) for Fuel Cell Powered Chem-E-Car Class
145k Forwarding Green Chemical Engineering Education and Research through a Student Run Organization: the Society of Environmental Engineers and Scientists
145l Complex Fluids in Motion: Elastic Instabilities in Microfluidic Devices, Advection-Diffusion-Reaction Systems, and Granular Flows
145m Introducing Microreaction Engineering in the Education
Session 162 - Eating Your Way Through the ChE Curriculum: Using Food to Teach Engineering
Chair: Mariano J. Savelski
Vice Chair: David L. Silverstein
162a Chemical Engineering as an “Eggs Act" Science
162b Better Eating through Surface Chemistry
162c The Proper Place for Beer in the Undergraduate Curriculum
162d Twin-Screw Food Extruder: a Multivariable Case Study for a Process Control Course
162e Welcome to Che: Chocolate Engineering
162f Teaching Process Engineering Fundamentals Using an Ice Cream Maker
Session 184 - Recruiting, Mentoring, and Motivating Graduate Students
Chair: Donald P. Visco
Vice Chair: Julie L. Jessop
184a How to Grow Your Graduate Students (Mentoring Tips)
184b Graduate Student inside an Undergraduate Class Room - an Integrated Experience
184c Using
Technical Articles to Teach Entering Graduate Students the Role of Journal
Articles in Research
184d Using the Classroom to Improve Mentoring and Motivation: a Class on “How to Be a Graduate Student"
184e Graduate Student Recruiting and Mentoring through an Reu Program
Session 218 - Incorporating and Assessing ABET Criteria
Chair: David C Miller
218a A Hands-on,
Multidisciplinary, Fun Engineering Team Design Project and Competition
for Freshman
218b Chemical Ethics in 52 Minutes or Less
218c Integrating Ethics, Socio/Cultural Awareness, Diversity, and Contemporary Global Issues into the Introductory Chemical Engineering Curriculum
218d Personal Class Binders (Pcb): an Incubator of Life-Long Learning
218e A Four Semester Evaluation of Various Techniques for Educating Chemical Engineers
218f Student-Directed Learning Modules
218g Towards
Achieving Abet Accreditation in Department of Chemical Engineering
at a Non-Us Institution
Session 225 - NSF Workshop I
Chair: Robert Wellek
Vice Chair: Wallace B. Whiting
225a Introduction
225b Nsf Overview
225c Nsf Nse Nanotechnology Science & Engineering Activities
225d Cyber Infrastructure and Complexity in Engineered & Natural Systems
225e Shared Cyber Infrastructure
225f Nsf Career and Igert Activities
225g Overview of Nsf Engineering Environmental Activities
225h Small Business Innovation Research Partnership Opportunities
225i Nsf International Activities
225j Major Research Instrumentation & Research Equipment Grants
225k Panel Discussion and Q & a Session
Session 237 - Teaching Alternate Separation Technologies
Chair: Laurent Simon
237a Continuous Opportunities for Teaching Membrane Technology into the Curriculum
237b Shortcut Methods for Multicomponent Gas Separation by Permeation in Membranes
237c Using a Commercial Simulator to Teach Adsorption and Chromatography
237d Theory and Practice in Bioseparation Engineering
237e Aqueous Two-Phase Extraction – a Case Study in Process Analysis and Control
237f Project Based Environmental Separations
Session 270 - NSF Workshop II
Chair: Robert Wellek
Vice Chair: William Krantz
270a Introduction
270b Overview of Chemical & Transport Systems Division
270c Chemical Reaction Processes
270d Interfacial, Transport, and Separations Processes
270e Fluid and Particulate Systems
270f Thermal Systems (Heat Transfer & Combustion)
270g Overview of Bio-Engineering & Environmental Systems
270h Biochemical and Biomedical Engineering Programs
270i Environmental Engineering & Technology
270j Panel Discussion and Q & a Session
Session 286 - What a ChE Educator Needs to Know about Bio
Chair: Patrick Gilcrease
Vice Chair: Paul D. Dunbar
286a A New Chemical and Biopharmaceutical Engineering Track at the University of Kentucky
286b The Research Proposal in Biochemical and Biological Engineering Courses
286c Resources for Teaching a Combined Biotechnolgy/Biomedical Engineering Course
286d Introduction to Biotechnology and Bioprocess Engineering - a Course for the Chemical Engineering Curriculum
286e Undergraduate Programs in Chemical and Biological Engineering in China
286f The Academic Institution's Response to the Biotechnology Industry's Demand for a Well Trained Workforce
286g A Multi-Year and Multidisciplinary Integration of Bioprocess Engineering into Chemical Engineering at Michigan Technological University
Session 367 - New Ideas for Electives and Old Courses: I
Chair: Kevin D. Dahm
Vice Chair: Joseph J. Biernacki
367a Graduate and Undergraduate Teaching of Colloid Science and Nanoscale Engineering - Combining Fundamentals with Emerging Technologies
367b Integrating Biophysics into Chemical Engineering
367c Single or Married: Electrokinetics or Electrokinetic-Hydrodynamics? a Dual Senior Elective/Grad Level Course
367d Development of a Molecular and Systems Biotechnology Course
367e Designing a Semester Long Course in Microfluidics for Advanced Undergraduate Science and Engineering Students
367f Pharmaceutical Engineering Courses as Electives for Chemical Engineering Students
367g Integration of Molecular Modeling Concepts in Thermodynamics and Kinetics Courses
367h An Elective Course in Drug Delivery for Chemical Engineers
Session 416 - New Ideas for Electives and Old Courses: II
Chair: Joseph J. Biernacki
Vice Chair: Kevin D. Dahm
416a Hands on Experiments in an Introduction to Chemical Engineering Course
416b Better Integration of Process Design/Control Principles in Engineering Labs
416c An Effective/Efficient Way to Teach Senior Lab - Distillation Column
416d Product Design and Process Design -- Together at Last!
416e Contemporary Issues in Homeland Security in a Chemical Process Safety Course
416f Incorporating Chemcad with Process Design: a Laboratory Method
416g Homeland Security and Safety Engineering – Concept, Curriculum and Challenges
Session 285 - Tutorials: Optimal Corporate Structures and Styles of Innovation
Chair: Daniel Hershey
Vice Chair: Frank Van Lier
285a Designing an Optimal Corporate Structure
285b Using Styles of Innovation for Strategy and Growth
Session 318 - Entrepreneurial Science for Educators, Engineers, and Scientists
Chair: Rosemarie D. Wesson
Vice Chair: Adam Lo Shrier
318a The Impact of
Science Entrepreneurship in a University on Economic Development
in the Regeion
318b Ohio's Third Frontier Initiative: Ideation to Commercialization
318c Human Capital and Technology Transfer: the Key Third Link
318d How to Successfully Launch and Nurture a University Spin-off
318e From Prototype to Product with the Help of Sbir Funding
318f Nanoscale Materials, Inc.; Founded 1995; Nanoactive® Products for Environmental Protection and Remediation
Session 370 - Project Management
Chair: Frank Van Lier
Vice Chair: Eldon R. Larsen
370a A Project Management Guide to Improving Productivity
370b A Project Management Centered Approach for Moc in the Process Industry
370c Radically Accelerate and Improve New Product Development
370d A Holistic Approach for Portfolio Selection and Resource-Constrained Scheduling of Multi-Task Projects
370e Project Flow: Lowering Wip to Increase Productivity and Throughput
Session 410 - Lean Product Development and Lean Manufacturing
Chair: Charles J Brez
Vice Chair: David Barbieri
410a Lean Innovation – the Application of Lean Thinking to New Product Development
410b Lean beyond Manufacturing - Competitive Advantage for the Process Industries
410c Business Continuity and Lean Operations – Synergies and Conflicts
410d The People Side of Process Improvement
410e Management of Supplies and Movements of Tank Containers in Chemical Logistics
Session 83 - Solid-Liquid, Liquid-Liquid and Gas-Liquid Mixing
Chair: Piero M. Armenante
Vice Chair: Richard V. Calabrese
83a A Continuous-Jet Hydrate Reactor for the Formation of Co2 Hydrate Particles: Hydrate Formation and Dissolution in a High-Pressure Water Tunnel Facility
83b Formation and Size Distribution of CO2 Drops in Static Mixer for Ocean Disposal
83c Influence of Process and Formulation Variables on the Rheological Properties of Highly Concentrated Water-in-Oil Emulsions
83d Break-up and
Coalescence Kinetics in a High Dispersed Phase Fraction
Liquid-Liquid System
83e Liquid-Liquid and Gas-Liquid Laminar Dispersion in a Smx Static Mixer
83f Application of a Stereoscopic Vision System for the Accurate Measure of Air Bubbles Density Trapped in Oil Drops in a Model Fermentation System
83g Axial Dispersion of Gas Phase in Slurry Bubble Column Reactor
Session 131 - Novel Computational and Experimental Methods in Mixing: I
Chair: Elizabeth M. Marshall
Vice Chair: Alvin Nienow
131a Novel Computational and Experimental Methods in Mixing
131b Using a Dispersed Phase Model to Track Particle Paths and Deformation Rates in Complex Mixing Geometries
131c Conservation and Cartesian Methods
131d Simulation of Turbulent Mixing and Chemical Reaction in a Partially Stirred Reactor Using the Direct Quadrature Method of Moments
131e Mixing Times and Mixing Time Correlations Revisited by Means of Les
131f Tendrils and Sheets: Topology of Injections in Steady Chaotic 3d Flow
131g Design of a Static Mixer Using CFD and Experiments
Session 178 - Novel Computational and Experimental Methods in Mixing: II
Chair: Elizabeth M. Marshall
Vice Chair: Alvin Nienow
178a Interfacial Area Concentration Transport Computed from a Length Scale Limited Interfacial Area Transport Balance Equation
178b Aggregative Mixing
178c Using CFD to Capture Macro-Instability Modes in a Stirred Tank
178d Experimental and CFD Study of Mixing Quality of the Maxblend Impeller
178e Computational Evaluation of Impeller Performance Based on Information Entropy Theory
178f Experimental Power Number Data for Pitched Blade Impellers
Session 222 - Mixing in Microdevices and Microreactors I
Chair:
Vice Chair: Abraham D. Stroock
222a Extracting and Mixing by Using Integrated Actuators in a Microfluidic System
222b Towards the Design of High Efficiency, Passive Microfluidic Mixers
222c Microsystems: Measuring Mixing Efficiency Using Statistical Entropy
222d To MIX or Not to MIX - Routes to Structured Materials
Panel Discussion on Mixing in Microdevices and Microreactors
Session 266 - Mixing in Microdevices and Microreactors II
Chair: Abraham D. Stroock
Vice Chair:
266a Micromixing Using Planar Curved Channels
266b Numerical Simulation of Mixing in Micro-Channels Packed with Spherical Beads
266c Mixing and Flow of Partially Miscible Components in Submicron Channels - III
266d Mass Transport to Boundaries and Mixing in Microfluidic Systems
266e Microfluidic Mixing Based on Transverse Electro-Osmotic Flows
Session 335 - Mixing Issues in Industrial Processes I
Chair: Shaffiq Jaffer
Vice Chair: Harish Santhanam
335a 2005 Namf Award Lecture: Mixer Design for the Masses
335b A Process for the Manufacture of Chemically Produced Toner (Cpt)
335c Production of Yogurt from Goat Milk in Agitated Conditions
335d Mixing and Reaction in the Formation of Block Copolymer Self-Assembly of Nanoparticles
335e A New Methodology for Scale-up of Bubble Column Reactors
335f Computational and Experimental Determination of the Velocity Distribution in a Stirred Reactor with a Retreat Blade Impeller Using Ldv Experimentation and CFD Modeling
335g Vortex Depths in Partially-Baffled Vessels with Pitched Blade Impellers - an Experimental and Correlational Study
335h Baffling Approaches for Modern Axial-Flow Impellers
Session 363 - Mixing Issues in Industrial Processes II
Chair: David S. Dickey
Vice Chair: Midey Chang-Mateu
363a Scale up of a Co-Current Solid Liquid Leaching Process
363b Drawdown of Floating Solids in Stirred Tanks
363c Pilot-Scale Studies of Requirements for Suspending Settled Solids in Srs Process Tanks
363d Different Solids Suspension Techniques in Flue Gas Desulfurization
363e Predicting the Effect of Mixing on Oxygen Transfer and Nutrient Removal in Activated Sludge Basins
363f Effect of Jet Pulsing on the Mixing of Non Newtonian Fluid in Storage Tank
Panel Discussion on Industrial Mixing
Session 409 - Laminar Mixing and Mixing Fundamentals
Chair: Julian Fasano
Vice Chair: Susan A Somers
409a Mixing Analysis of a Coaxial Mixer
409b Power and Flow in Stirring Viscoelastic Fluids
409c Dynamic Behavior of Stretching and Folding of Fluid Interface Induced by Reciprocating a Disk in a Cylindrical Vessel
409d Particle Behavior in Closed Streamline Flows: Dilute and Concentrated Suspensions
409e Mixing Characteristics of High Viscous Fluid by a Multi-Holed Static Mixer
409f The Interstate Highway System of Fluid Flow: a Flow Skeleton Method to Study Mixing in Realistic 3d Autonomous Flows
Session 466 - Mixing and Chemical Reaction
Chair: Rodney O. Fox
Vice Chair: Otute Akiti
466a Optimum Photolysis in Taylor-Couette Flow
466b Novel Bioreactor Design for the Culture of Suspended Mammalian Cells
466c Continuous-Phase
Mixing in Reactive Bubble Swarms with Fully
Resolved Dynamic Interfaces
466d Understanding Selectivity of an Exothermic Lithiation Reaction in a Semi-Batch Reactor Using CFD and Kinetic Modeling Tools
466e Laboratory/Pilot Plant Experimentation for Developing a Liquid-Liquid Mixing Process Involving Complex Chemical Reactions
466f Performance of Surface Feed with Pbtu and Varying Reaction Kinetics
466g Modelling and Design of Non-Ideally Mixed Batch and Semi-Batch Reactor Systems
466h Jet Mixers in Preventing Runaway Reactions – a CFD Based Review
Session 44 - Transport Phenomena and Renewable Energy Systems
Chair: Virendra K. Mathur
Vice Chair:
44a A Program for the Directed Evolution of Oxygen-Tolerant Hydrogenase Enzymes for Use in Photobiological Hydrogen Generation
44b Modeling and Optimization of Fluid-Wall Aerosol Reactors for Solar Thermochemical Hydrogen Production
44c An in Vitro Expression Method for the Production and Study of Iron-Sulfur Proteins
44d Active Storage of Liquid Hydrogen
44e Comparative Thermogravimetry/Mass Spectrometry Study of Woody Residuals and an Herbaceous Biomass Crop
44f An Integrated Mathematical Model of Fluid Dynamics, Heat Transfer and Reaction Kinetics for Fluidized Bed Gasification of Biomass
44g An Economic and Thermodynamic Evaluation of the Conversion of Natural Gas to Liquid Fuels Using an Ion-Transport Membrane
44h Ionic Liquids Containing Ester Group as Potential Electrolytes
Session 259 - Dynamics of Complex Fluid Systems
Chair: Sanjoy Banerjee
Vice Chair: Valeriy Ginzburg
259a Lyotropic
Chromonic Liquid Crystals: Self-Assembly and Emerging
Optical and Biological Applications
259b Harnessing Light to Create Defect-Free, Hierarchically Structured Polymeric Materials
259c Predicting Fluid Flow and Pressure Drop in Randomly Packed Beds of Cylindrical Particles by Coupling DEM and CFD
259d Rheological Characteristics of Anti-Icing Fluids
259e Surfactant Effects on Highly Nonequilibrium Surfaces: Surfactants and Drop Detachment
259f Structure Development in Phase-Separating Complex Fluid Systems
259g Theoretical
and Experimental Studies of New Polymer-Metal High-Dielectric
Constant Nanocomposites
259h Drying, Film Formation and Particle Coalescence in Polymer Films and Coatings: a Theoretical and Experimental Study
259i On Fluctuations in Polymer Solutions: Field Theoretic Simulations
259j Computational Fluid Dynamics Modeling of Inter- Circulating Fluidized Bed
Session 40 - Self-Assembled Biomaterials: Part I
Chair: Andre Palmer
Vice Chair: Padma J. Narayan
40a The Design of Potent Liposome-Based Inhibitors of Anthrax Toxin
40b Formation of
Supported Functional Bilayers by Vesicle Fusion:
Experimental Data and Modeling
40c Using Crystallinity to Control Structure and Rheology of Pla-Peo-Pla Hydrogels
40d Soft Supported Biomimetic Membranes: Assembly and Performance
40e Fabrication and Characterization of Solid-Supported Membranes on Silica Beads Using Bacteriorhodopsin Conjugates as Integrated Anchors
40f Toward
Controlled Conformational Change of Self-Assembled Vault
Nanocapsules in Solution
40g Nanometer-Scale
Structure and Erosion Profiles of Erodible
Multilayered Polyelectrolyte Films
50a Microaligned Collagen Matrices by Hydrodynamic Focusing: Controlling the Alignment and pH-Induced Self-Assembly of Collagen
Session 50 - Advances in Biomaterial Science and Engineering
Chair: Sundararajan V. Madihally
Vice Chair: Abraham D. Stroock
50b Synthesis and Characterization of Poly(L-Lactide) Networks as in-Situ Crosslinkable Scaffolds for Guided Tissue Regeneration
50c Solid-Phase Synthesis of Functionalized Peptides as Enzymatically Degradable Crosslinkers for Fabrication of Tissue Engineering Scaffolds
50d Degradable Segmented Polyurethanes for Bone Tissue Engineering
50e Functionalizable Biomaterials Based on Dihydroxyacetone
50f Staphylococcus Epidermidis Adhesion on Modified Silicone Rubber
Gemetric Control of Directional Cell Migration
Session 59 - Eco-Friendly Composites
Chair: Gautham Parthasarathy
Vice Chair: David R. Shonnard
59a Development
of Recyclable Paraffin-Based Composite Coating for
Moisture Barrier Applications
59b Morphology of Fatty Acid-Based Vinyl Esters
59c Low Density Microcellular Foam Wholly Thermoplastic Composite
59d Towards Inexpensive Nanostructured Composites: Layer-by-Layer Assembly of Cellulose Nanocrystals and Poly(Diallyldimethylammonium Chloride)
Session 81 - Self-Assembled Biomaterials: Part II
Chair: Andre Palmer
81a Novel Nanomaterials: Lbl Self-Assembly at “Soft" Interfaces
81b Stimuli-Responsive Lysine-Glycine
Block Copolypeptide Supramolecular Structures
81c Self-Assembly of Amphiphilic Linear Dendritic Block Copolymers for Drug Delivery
81d Polymeric Worm Micelles as Nano-Carriers for Drug Delivery
81e Patterns of Aptamers on Polyelectrolyte Multilayers
81f Artificial Protein Polymers for Development of Nanostructured Biomaterials
81g Templated Deposition of RNA-Functionalized Colloids
100a Understanding Endothelialization: Rate Limitations in Chemotaxis,
Session 100 - Advances in Biomaterial Design and Properties
Chair: Anu Subramanian
Vice Chair: Dharmashankar Subramanian
100b Improved Marrow Stromal Cells Response on Nanostructured Surfaces for Bone
100c Synthesis and Characterization of L-Tyrosine Containing Polyurethanes: New Biomaterials for Medical Applications
100d Elastomeric Tissue Mimetics Fabricated by a Microintegration Approach
100e Design of a Biomimetic, 3d Scaffold Suitable for Different Tissue Engineering Applications
100f Effect of Lactide to Ethylene Glycol Ratio on Material Properties of Novel Biodegradable Poly(Lactide-Ethylene Oxide-Fumarate) Terpolymer Hydrogels
100g Critical Aspects of Oligonucleotide Assembly by Pcr
100h Insect Cuticle as a Motif for Biomimetic Materials
130a Molecular Size-Selective Vessel: Spherical Nano-Net
Session 130 - Novel Catalytic Materials
Chair: Vadim V. Guliants
Vice Chair: Michael S. Wong
130b Nano-Crystalline Metastable and Stable Carbides of Molybdenum for Hydrogenation/Dehydrogenation Reactions
130c Factors That Affect the Mesoporosity Development in Zsm-12 by Desilication
130d M1 to M2
Phase Transformation in Mo-V-Te-O Catalysts for Selective
(Amm)Oxidation of Propane
130e Durability Investigation of Carbon Nanotube as Catalyst Support for Proton Exchange Membrane Fuel Cell Electrode
Session 142 - MESD Poster Session
Chair: Chih-hung (Alex) Chang
Vice Chair: Yossef A. Elabd
142a Comparisons
of Methods to Bond Metal and Chitosan: a Biopolymer for Use as
an Implant Coating
142aa Hydrothermal Synthesis and Corrosion Resistance of Vanadium Zsm-5 Films
142ab Superhydrophobic Conducting Polymer Films: Synthesis and Reversible Wettability
142ac Molecular Studies of Proteins Encapsulated in Hydrogels
142ad Zeolite a Coatings for Use in Condensing Heat Exchangers Onboard Manned Spacecraft
142ae Electroless Deposition of Transparent Conducting Zn2Sno4 for Solar Cell Applications
142af Impact of Carbon Nanofibers on Cure Kinetics and Viscosity of Vinyl Ester Resin System
142ag Computer Aided Design for Engineering Elastomers
142ah An Investigation of Nickel-Based Amorphous Alloys and Their Corrosion Products
142ai Dynamic
Modeling of Solid-State Polymerization of Bisphenol a in a Moving Packed
Bed Reactor
142aj Morphology,
Composition and Thermal Stability of Flame-Made Zirconia-Based
Mixed Oxides
142ak The Effect of Filler and Diamine Size on the Fracture Toughness of Alumina Reinforced Epoxy Composites
142al Chemical Vapor Deposition Copolymerization of Functionalized Paracyclophanes: an Approach Towards Multivalent Surface Coatings
142am Effects of Template-Monomer Complex Formation on the Synthesis of Molecularly Imprinted Polymers in Aqueous Medium
142an Synthesis and Characterization of pH-Sensitive Poly(Ethylene Glycol) -Rich Full Interpenetrated Polymer Networks for Controlled Drug Delivery
142ao The Kinetics and Mechanism of Rapid Nickel Oxalate Thermal Decomposition
142ap Microinjection Molding of Microstructures - Experimental and Numerical Simulation
142aq Combinatorial Studies of Phase Behavior in Polyanhydride Blends
142ar Polymeric
Nano-Porous Materials Prepared Via Interfacial Polymerization in
Soft Ionic Liquids
142as Towards Molecular Simulation of Polythiophene Oligomers
142at Polyimide-Polysiloxane Segmented Copolymers for Fuel Cell Applications
142au Real-Time and in-Process Monitoring and Control of Polymerization Processes
142av Functional Polymer-Polymer Nanocomposites
142aw Experimental Study of Slip Flow in the Semi-Hyperbolically Converging Dies
142ax A Generalized Approach to Construction of Complex Tissues
142ay Numerical Modelling of Injection Moulding : Comparisons Using the Phan-Than-Teinner & Criminale-Erickson-Fibley Models
142az Molecularly Smooth Cellulose Surfaces for Adhesion Studies
142b Using
Computational Fluid Dynamics to Study and Improve Multihole Schwarz
Melt-Blowing Dies
142ba Morphology and Water Barrier Properties of Silane Films: the Effect of Process Parameters
142bb Material and Process Approaches to the Fabrication of Hierarchically Structured Tissue Engineering Scaffolds
142bc Adsorption and Dissociation Kinetics of Dichlorosilane on Silicon Surface
142bd Inverted Colloidal Crystals (Icc) Scaffolds as Three Dimensional Microenvironments to Study Cell Interactions in Co-Cultures
142be Characterization and Fabrication of Capillary Flow Networks in Collagen-Based Scaffolds for the Development of Tissue-Engineered Products with Built-in Microvasculature
142bf Hydrothermal Degradation of Bis-Silane Films
142bg Photoacid Diffusion in Photoresist Polymer Thin Films: Approaches for Measurement and Control of Thin Film Acid Diffusion
142bh Nano– and Layered–Morpholgies in Atactic/Syndiotactic Polystyrene Blends
142bi Quantification
of Bioparticulate Adhesion on Polymeric Surfaces Using Atomic
Force Microscopy
142bj Blending Chitosan with Polycaprolactone: Effect on Physicochemical Characteristics and Anti-Bacterial Activity
142c Adhesion and Viability of Liver Cells on Potential Bioreactor Materials
142d Mechanistic
Modeling of Nitroxide-Mediated Controlled Radical Polymerization of
Gradient Copolymers
142e The Influence of N-Vinyl Pyrrolidinone on the Photopolymerization Kinetics and Mechanical Properties in Copolymerization with Acrylates with Increasing Functionality
142f Polyolefin-Organoclay Nanocomposites: Properties, Morphology, and Applications
142g Crystallization, Melting, and Dynamic Relaxation Characteristics of Ptt and Ptt Blends
142h Synthesizing
Model Block Copolymers Via Atrp: the Utility of Kinetic Modeling
in Guiding Experiments
142i Dynamic
Relaxation Characteristics of Crosslinked Poly(Ethylene Glycol)
Networks and Composites
142j Assembly of Carbon Tube-in-Tube Nanostructures
142k Reaction Kinetics and Mechanism of Nickel Fiber Synthesis
142l Simulation of Contraction Flow of a Polystyrene – Carbon Dioxide Solution through an Axisymmetric Extrusion Foaming Die
142m Pickering Emulsions - a Paradigm Shift
142n Fabrication of Magnetic Nickel-Tungsten-Phosphorus Particles by Electroless Deposition
142o Influence of Heating Rate on Fine Structures of Japanese Cedar Chars
142p Control of Crystal Structure and Its Defect of Ε-Hniw Prepared by Evaporation Crystallization
142q A Novel
Application of Solubility Parameter in Extraction of Bioactive Substances
from Natural Products
142r A Morphological Investigation of Soot Coming from the Detonation of Munitions
142s Transport of Water in Nafion® Using Time-Resolved Ftir-Atr Spectroscopy
142t Conformal Coating of Ceramic Nanoparticles Via Atomic Layer Deposition
142u Synthesis & Characterization of Polyimide/ Poss Nanocomposites
142v Continuous Flow Microreactor for Chemical Bath Deposition
142w Elastic Modulus and Hardness Studies of Single Crystal Zeolites Mfi, Fer, and Cha
142x Mechanical and Rheological Properties of Polyalkenoate Cements Designed as Portland Cement Substitutes
142y Zeolite Y Coatings on Al-2024-T3 Substrate by a Novel Three-Step Synthesis Method
142z Uv-Induced Tunability of Refractive Index for Dielectric Films Via Photoacid-Catalyzed Decomposition of Templated Sacrificial Polymers
Evaluation of the Extraction and Swelling of Colombian Coals
Oxidation of Low Rank Colombian Coals with Hno3-Air
Study of
the PirLisis of Organic Residues and Waste Water, for the Light
Obtaining of Petroleum
Session 157 - Biomaterials for Gene Therapy and Drug Delivery
Chair: Lonnie D Shea
Vice Chair: Howard W. Matthew
157a Functionalizable Polymer Precursors for Non-Viral Gene Delivery Vectors
157b Synthesis and in Vitro Characterization of a Triblock Copolymer Carrier for Sirna
157c An Anionic
Polymer Enhances Cationic Lipid-Mediated Delivery of
Antisense Oligonucleotides
157d Multilayered Polyelectrolyte Films for the Localized Delivery of DNA to Cells
157e Patterned Substrate-Mediated Gene Delivery Using Microfluidics
157f Development and in Vitro Evaluation of a Peg-Insulin Conjugate Protein for the Treatment of Diabetes Mellitus
157g Engineering Shape of Polymeric Microparticles for Drug Delivery
157h Engineering Nanoscale Hydrogel Particles Entrapping Bovine Hemoglobin as Temperature and pH Sensitive Oxygen Carriers
Session 174 - Nanoparticle Assemblies and Superlattices
Chair: Michael Z. Hu
Vice Chair: Ilona Kretzschmar
174a A Monte Carlo and Continuum Study of the Mechanical Properties of Porous Titania Nanoparticle Aggregate Films
174b Controlled Deposition and Modification of Antireflective Coatings from Silica Nanoparticles
174c Determination of Zeolite Nanoparticle Morphology Evolution Mechanism from Simulations and Saxs/Tem Measurements
174d Assembly of Structurally Ordered Nanoparticle Thin Films Utilizing a CO2-Expanded Liquid Deposition Strategy
174e Molecular
Dynamics Simulation of the Coalescence Kinetics of Bare
and Coated Nanoparticles
174f Nanotiling: Coatings from Suspensions of Hexagonal Zeolite Particles
174g Rational Fabrication of Nano-Electronic Devices Via Bottom-up Self-Assembly
Session 187 - Structure and Properties of Polymers I: Mechanics and Rheology
Chair: Jing Wu
Vice Chair: Sachin Velankar
187a Local Dynamics of Syndiotactic Pmma Using Molecular Dynamics Simulation
187b Rheological and Structural Studies of Linear Polyethylene Melts under Planar Elongational Flow Using Nonequilibrium Molecular Dynamics Simulations
187c Visualizing
Worm Micelle Dynamics and Phase Transitions of a Charged
Diblock Copolymer in Water
187d Effect of Free Volume Distribution on Transport and Dissolution Properties of Polymers
187e Rapid Crack
Propagation Failures in Pressurized Hdpe Pipes:
Structure-Property Investigations
187f Terahertz Dynamics of Polymer Crystallization
187g Crystalline Structure Formations under Steady-State Isothermal Planar Elongational Stretching of N-Alkanes: a Molecular Dynamics Study
187h Characterization of Mechanical Property Variations in Pressure Sensitive Adhesive Films Using Quasi-Static and Dynamic Nanoindentation
187i High-Throughput Screening of Mechanical Properties in Polymers
202a Ehd Monomer Effect on Myoblastic Cell Attachment and Proliferation
Session 202 - Bioinspired / Biomimetic Materials
Chair: John P. Fisher
Vice Chair: Christine E Schmidt
202b Spontaneous Formation of Gelatin-Polycaprolactone Matrices for Tissue Engineering
202c Synthesis and Characterization of Amphiphilic Block Copolymers, Self-Assembly Behavior and Drug Delivery Applications
202d Preparing Porous Polymeric Particles by Localized Solvent Implosion for Pulmonary Drug Delivery Applications
206a Preparation of Hydrophobic Multilayers on Solid Surfaces
Session 206 - Chemical Vapor Deposition I
Chair: Daniel D Burkey
Vice Chair: David S. Dandy
206b in Situ Real-Time Diagnostics for Studying the Structural Evolution of Nanocrystalline Silicon Thin Films during Plasma Deposition
206c Roll-to-Roll Initiated Chemical Vapor Deposition (Icvd) of Functional, Flexible Nanomaterials
206d On-Line Apcvd of Sno2 Coatings on Glass
206e Metal Organic Chemical Vapor Deposition of Titanium Oxynitride Films Using Tetrakis(Diethylamino)Titanium
206f Chemical Vapor Deposition of Palladium Seed Layers
206g Deposition of
WnXCY Using Allylimido Complexes CL4(Rcn)W(Nc3H5):
Effect of Nh3 on
Film Properties
Session 207 - Composites - Structure and Properties
Chair: John J. La Scala
Vice Chair: Amod A. Ogale
207a Effect of Particle Size on the Mechanical Properties of Pc/Pbt Blend Composites
207b Al2O3-Reinforced Epoxy Composites with Enhanced Fracture Toughness: a Sem, Rheology and Mechanical Study
207c Nanoparticles and Long Fibers Reinforced Thermosetting Composites
207d Synthesis of Surface-Functionalized Nanotube-Polymer Network Composites
207e Viscoelastic Investigations of End-Tethered Silica-Poly(Butyl Acrylate) Nanocomposites
207f Shear Thickening Fluids Reinforced by Discontinuous Short Fibers: Ballistic and Rheological Properties
207g A Coarse-Grained Simulation of Rheology of Polymer Nanocomposites
Session 220 - Liquid-Phase Synthesis of Nanoparticles
Chair: Michael T. Harris
Vice Chair: Michael Z. Hu
220a General Shape Control of Colloidal Cds, Cdse and Cdte Semiconductor Nanorods and Nanorod Heterostructures
220b Small-Angle X-Ray Scattering and NMR Investigations of Zeolite Nucleation and Growth
220c Synthesis of Size, Shape and Composition Controlled Nanocrystals of Metals, Metal Alloys and Metal Oxides
220d A Novel Thermal Electrochemical Synthesis Method for Production of Stable Colloids of “Naked" Metal (Ag) Nanocrystals
220e Mechanical
Strength Measurements of Single Crystal Zeolites Cha, Mfi,
and Fer by Nanoindentation
220f Size and Shape-Controlled Synthesis of Bifunctional Gold/Fe3O4 Nanoparticles
220g Surface Modification of Magnetic Nanoparticles: Characterization and Colloidal Stability in Polar Solvents
Session 232 - Polymer Thermodynamics I
Chair: Gerassimos Orkoulas
Vice Chair: Michael C- Huang
232a Finding Simplicity in Complexity: Scaling, Tricriticality, and Crossover in Polymer Solutions
232b Evaluation of
Energetic and Entropic Contributions to the Free Energy of
Oriented Polymer Melts
232c Extending Thermodynamic Plasticizer Models to Ionic Liquids
232d Study of Single-Site Linear Low- Density Polyethylene Liquids Using Inverese Gas Chromatography and Molecular Dynamics Simulation
232e Efficient Modelling of Phase Equilibria of Polydisperse Polymer Systems Using the Saft Equation of State
232f High-Pressure Phase Behaviour of the System Linear Low Density Polyethylene + N-Hexane + Ethylene: Experimental Results and Modelling
232g Interfacial Properties for Polymer and Copolymer Systems by Density Functional Theory
Session 233 - Polymers for Biofunctional Surfaces
Chair:
Vice Chair: Rastislav Levicky
233a Transnitrosation
and Release Kinetics of Nitric Oxide (No) with
Cysteine-Modified Biomaterials
233b Living Radical Photografting - a Versatile Technique for Engineering Biofunctional Surfaces
233c Surface Modification of Poly(L-Lactide) Films to Study the Effect of Surface Chemical Functionality on Fibroblast Adhesion
233d Combinatorial Libraries for Investigation of Cell Interactions with Polymer Surfaces
233e Nanoscale Protein Patterning Using Self-Assembled Diblock Copolymers
233f Bioactive Surfaces Based on Aldehyde-Containing Reactive Polymer Coatings
233g pH and Salt Responsive Peg Sams on Polyelectrolyte Multilayer
233h Evaluation of Polymer and Self-Assembled Monolayer Coated Silicone Surfaces to Reduce Neural Cell Growth
233i Evaluation of the Effect of the Chemistry of Biodegradable Polycarbonate Polymers Containing Iodine and Peg on Cellular Responses of Vascular Cell Lines
Session 236 - Structure and Properties of Polymers II: Multicomponent Systems
Chair: Rachel A. Segalman
Vice Chair: Zhong-Ren Chen
236a Structural Origin of Thermomechanical Behavior in Semicrystalline Ionomers
236b The Role of Positive Counterion in Ethylene-Methacrylic Acid Copolymer Blends with Nylon
236c Improved Polarizable Potential Model and Simulation Study of Aqueous Systems of Polyethylene Oxide and Inorganic Salts
236d Synthesis and
Novel Application of Gradient Copolymers: Compatibilization
of Immiscible Polymer Blends
236e Composition Dependence of the Dynamics of Poly(Methyl Methacrylate) in Binary Blends with Poly(Ethylene Oxide)
236f Self-Consistent Brownian Dynamics Simulations of Ternary Polymer Blends
236g Modeling of
Phase Behavior of Polymer Blends Containing Linear
Telechelic Supramolecular Polymers
236h Nanoscale Polymer Blends Via Mechanical Milling
236i Photopolymerizable Thiol/Vinyl Ether Hybrid Materials
Session 255 - Composites - II
Chair: Giuseppe R. Palmese
Vice Chair: Deepak Srinivasagupta
255a The Glass
Transition and Physical Aging Behavior of Polymer Nanocomposites
Studied Via Fluorescence
255b Healing Surface Defects with Polymer Nanocomposites Containing Spheres and Rods
255c Melt Processing and Rheological Behavior of Modified Clay/Polyolefin Nanocomposites
255d Suspension
Polymerization of Inverse Emulsion of Water Expandable
Polystyrene/Clay Nanocomposites
255e Properties and Morphology of Organoclay/Poly(Styrene-Co-Acrylonitrile) Nanocomposites: Effect of Copolymer Composition
255f Mechanical Properties of Nanocomposite Systems
Session 272 - Nanostructured Thin Films
Chair: Hugh W. Hillhouse
Vice Chair: Stephen E. Rankin
272a Functionalized Mesostructured Silica for Proton-Exchange Membranes
272b Microfabrication of Mesoporous Silica Films for Mems Applications
272c Synthesis of Ordered Mesoporous Tin Oxide Thin Films Displaying Extremely High Thermal Stability: a Tem and Saxs Study of Structural Changes during the Thermal Treatment
272d Investigation of the Curing Kinetics in Dip Coated Surfactant / Sol-Gel Silica Films
272e Synthesis of Tantalum Pentoxide Films for High Temperature Applications
272f On the Interpretation of Artifacts in 2d Gisaxs Patterns of Nanostructured Films
272g Fabrication of Zeolite Films Using Layer-by-Layer Depositions
272h Hydrothermal Synthesis of Inorganic and Organic Nanocomposite Zsm-5 Films from Recycled Solution
272i Hydrophilic and Antimicrobial Zeolite Coatings
Session 276 - Polymer Thermodynamics II
Chair: Rajesh Khare
Vice Chair: Vivek M Prabhu
276a Organic Vapor
Sorption by Copolymers of Poly(Styrene-Butadiene) Using a
Quartz Crystal Microbalance
276b Measurement of the Solubility of Poly(Methyl Methacrylate)-Methyl Methacrylate System in Supercritical CO2 and Their Modeling Using Saft
276c Modelling the Solubility of Chitosan in Supercritical Carbon Dioxide through Saft
276d Extrapolating Molecular Models of Thermodynamic Properties to Polymeric Species
276e Predicting Solubilities in Polymer Systems Using Cosmo-Rs
276f The Role of Curvature Dependent Free Energy in the Behavior of Polymer Vesicles and Composite Droplets
276g Computation of the Nonhomogeneous Equilibrium Phase Behavior of a Rigid Rod System
Session 278 - Polymers for Fuel Cell Applications
Chair: Yossef A. Elabd
Vice Chair: Ravindra Datta
278a Near Net-Shape Fabrication of Nafion® Membranes for Fuel Cell Applications
278b Nafion®/Poly(Vinyl
Alcohol) Blends: Effects of Crosslinking Conditions
on Transport Properties
278c Investigation of PEM Fuel Cell Behavior: Swelling and Viscoelastic Properties of Nafion
278d Durability of Perfluorosulfonic Acid Membranes for PEM Fuel Cells
278e Synthesis and Characterization of Thermosetting Copolymers as PEM's
Session 283 - Structure and Properties of Polymers III: Networks and Gels
Chair: Zhong-Ren Chen
Vice Chair: Ronald C. Hedden
283a Phenol
Formaldehyde Gels: Studies on the Gel Formation at a High
Temperature and at Different pH
283b Dynamics of Poly(Ethylene Glycol) Networks and Their Relation to Gas Transport Properties
283c Lithium Ion Transport in Rubber-like Poly(Ethyleneimine) Electrolytes
283d In-Situ Monitoring of Photopolymerization Using Microrheology
283e Highly Responsive Self-Assembled Gels from Block Copolymers in Liquid Crystal Solvent
283f Pulverization of Rubber with or without Carbon-Black under High Normal and Shear Forces
283g A Gaussian Slip-Link Model for Cross-Linked Polymers
283h Co-Crystallization of Ethylene-Propylene-Diene Elastomer with Polyethylene Plastomers
283i The Solid State Shear Extrusion Process Optimization for Cross-Linked Polymers
283j Molecular Dynamics Simulation of Discontinuous Volume Phase Transitions in Permanently Crosslinked Polyelectrolyte Networks
Session 332 - Materials Engineering and Science Division Plenary Session
Chair: Dennis W. Hess
Vice Chair: Alon V. McCormick
332a Electro-Active and Redox-Active Block Copolymer Nanostructures
332b Polymerization in Surfactant Solutions
332c Biomolecular Interfaces Using Liquid Crystalline Materials
332d Hierarchically Engineered Inorganic Materials
332e Nanostructured Photovoltaic Materials
Session 350 - Diffusion in Polymers I
Chair: Yossef A. Elabd
Vice Chair: Peter Ludovice
350a Barrier Films with High Concentrations of Aligned Impermeable Flakes
350b Gas Barrier Properties of Polymeric Films with Hybrid Organic/Inorganic Coatings for Food Packaging Applications
350c Configurational Diffusion of Small Molecules through Nano-Confined Polymers
350d Dual Mode Transport with Finite Hole-Filling Kinetics in Glassy Polymers
350e Diffusion in Polymeric Systems: Arrhenius and Free-Volume Equivalance
350f Deliquescence, Diffusion, and Crystal Nucleation in Levitated Polyethylene Oxide
350g Experimental and Theroretical Investigation of Multicomponent Solvent Removal from Semicrystalline Polymers
350h An Improved Polarographic Apparatus to Determine Oxygen Permeability (Dk), Diffusivity (D), and Solubility (K) of Highly Oxygen-Permeable Contact Lenses
Session 365 -
Nanoscale Structure in Polymers I
Chair: C. Allan Guymon
Vice Chair: Matt J. Kipper
365a Polyester-Polyelectrolyte
Nanocomposite Membranes as Breathable
and Responsive Barriers
365b Molecular Dynamics of Pamam Dendrimers
365c Self Detoxifying Nanofiber Webs
365d Investigation
of Factors Influencing Phase Retention in Lyotropic
Liquid Crystal Template Polymerization
365e Characterizations of Nano-Structures of Polyurea Synthesized in Soft Ionic Liquids
365f High Aspect Ratio Pillar Arrays Formed Via Electrohydrodynamic Instabilities
365g Biocidal Coatings for the Military
Session 380 - Thin Film Processing
Chair: Brett A. Cruden
Vice Chair: Edward A. Evans
380a Multiscale Model for Plasma Enhanced Deposition on Nanostructures
380b Molecular Vapor Deposition for Enhanced Monolayer Stability and Durability
380c Interface Formation and Energy Level Alignment of Pentacene on Gan
380d Film
Deposition on Electrostatically Suspended Nanowires by Pecvd
in Dusty Plasma Reactor
380e Ion-Enhanced Plasma Etching of Metal Oxides in Chlorine Based Plasmas
380f Electron-Beam Hardening of Functionalized Polynorbornene Thin Films
380g Remote Oxygen Plasma Growth of Mgo Films on Sic for Functional Oxide Integration
380h Investigation of Local Coordination and Electronic Structure of Dielectric Thin Films from Theoretical Energy-Loss Spectra
Session 396 - Diffusion in Polymers II
Chair: Russell E. Gorga
Vice Chair: Yossef A. Elabd
396a Multi-Component Diffusion in Polymer-Solvent Systems
396b Modeling and Simulation of Nonsolvent Vapor-Induced Phase Separation
396c Coupled Diffusion in Biochemical Protective Suits
396d Probing Thermodynamic Effects in Polymer-Solvent Systems by Low and High-Pressure Inverse Gas Chromatography
396e Hybrid
Technique for the Monitoring of Diffusion of Water and Chromate
within a Primer Layer
396f Modeling of
Diffusion and Chemical Reactions in Ion-Exchange Resins during
Swelling and Shrinking
396g Pervaporation
of Water through Poly(Ethylene Glycol) Hydrogels: the Pumping
Mechanism of a Synthetic Leaf
Session 415 - Nanoscale Structure in Polymers II: Polymer Nanocomposites
Chair: John J. La Scala
Vice Chair: Matt J. Kipper
415a Measuring and Modeling of Flow-Induced Nanostructure of Nanoclay/Polymer and Nanofiber/Polymer Melt Composites
415b Measurements of Particle Orientation in Simple Shear and Channel Flows of Polypropylene/Clay Nanocomposites
415c Flow-Induced Crystallization of Polypropylene-Clay Nanocomposites: Clay Disorientation Kinetics and Morphology
415d Entanglement
Effects in the Plastic Deformation of Filled Polymer
Glasses: a Simulation Study
415e Styrene/Isoprene-Carbon
Nanotube Composites Via Emulsion
and Miniemulsion Polymerization
415f Synthesis of Water-Based Polystyrene-Nanoclay Hybrid Via Mini-Emulsion Polymerization
415g Surfactant Degradation in Melt Processed Polyethylene-Organoclay Nanocomposites
Session 471 - Polymer Thin Films and Interfaces I
Chair: Clifford L. Henderson
Vice Chair: Gerassimos Orkoulas
471a Comparision of the Distributions of Glass Transition Temperatures in Thin and Ultrathin Films of Polystyrene and Polymethylmethacrylate
471b CO2-Induced Surface Tg Reduction of Polymer and Theoretical Modeling
471c Structural
Relaxation of Nanoconfined Glassy Polymer Systems Studied
by Fluorescence Measurements
471d The Diffusion
Behavior of Polymer Ultrathin Films: Fundamental Insights and
Molecular Weight Effects
471e Thermodynamic Effects on Diffusion in Thin Polymer Blend Films
471f Moisture at Buried Polymer Interfaces: a Destabilizing Force
471g pH-Responsive Polymer Films and Membrane Skins
471h pH-Responsive Tethered Layers on Copolymer and Silicon Substrates
471i Smart Polymeric Surfaces—Responsiveness and Reconstruction
Session 476 - Self Assembly of Templating Inorganic Materials I
Chair: Hugh W. Hillhouse
Vice Chair: Michael S. Wong
476a Synthesis and Characterization of Mesoporous Silicate Films in Supercritical Carbon Dioxide through the Replication of Block Copolymer Templates
476b Introduction of Novel Functionalities to Mesoporous Silica through Nitridation
476c Microstructure Engineering of Mesoporous Silica Films
476d Gisaxs and Fesem as Tools to Investigate the Order and Orientation of Self-Assembled Mesoporous Silica Thin Films on Gold Substrates
476e Influence of Ammonia Vapor Post-Treatment on the Structure of Mesoporous Silica Prepared with Mixed Cationic and Glycoside Surfactants
476f Synthesis
and Characterization of Vesicular Nanoparticles Formed by Fluorinated
Surfactant Templating
476g Fabrication of Tio2-Sio2 Aerogel Monolith with Ordered Mesostructures
476h Enhanced
Infusion of Gold Nanocrystals into Mesoporous Silica with
Supercritical Carbon Dioxide
476i Silicon Surface Functionalization by Uv-Initiated Alkene Hydrosilylation
Session 486 - Advances in Nanolithography
Chair: Chih-hung (Alex) Chang
Vice Chair: Bruce J. Hinds
486a Intact Transfer of Layered Bionanocomposite Arrays
486b Enhancement
of Lithography Processes Using Co2: Co2-Modified
Development and Post Applied Bake
486c Directed
Self-Assembly of Block Copolymer Blends into Nonregular
Device-Oriented Structures
486d Selective
Growth of Zinc Oxide Nanowires Grown from Thin Film Multilayer
Structure for Shadow Lithography
486e Langmuir-Blodgett Technique as a Tool for the Synthesis of Nanostructures
486f Materials
and Processes and High Resolution Patterning Using Thermal
Cantilever Array Lithography
Session 488 - Biomembranes
Chair: M. L Gilchrist
Vice Chair: Surita R. Bhatia
488a Adhesion Behavior of Biomimetic Membranes
488b A Molecular Dynamics Investigation of the Surface Activity of Components of Pulmonary Surfactant at the Air/Water Interface
488c Determining the Effect of Cytoskeleton Disruption on Cell Rheology
488d Interaction of Amphiphilic Molecules with Lipid Monolayers
488e Afm Characterization of the Stability and Structure of Collagen Membranes
Session 517 - Polymer Reaction Engineering Kinetics and Catalysis I
Chair: Julie L. Jessop
Vice Chair: Carlos Villa
517a Ethylene-Norbornene Copolymerizations Via Silica-Immobilized Ti Cgc-Inspired Polymerization Catalysts
517b Kinetic Modeling of Acrylate Polymerization at High Temperature
517c Kinetics and Morphological Development in Syndiotactic Styrene Polymerization over Heterogeneized Metallocene Catalysts
517d Comparison of the Polymerization Kinetics of Bis(Triethoxysilyl)Ethane and Methyltriethoxysilane under Acidic Conditions
517e Influence of Water on Cure Kinetics Via Eb-Irradiated Epoxy Resin
517f The Effects of Raft Agent on Braching in a Free-Radical Polymerization
517g Kinetic Modeling and Parameter Estimation of the Metallocene Catalyzed Slurry Polymerization of Propylene: Effect of Mao/Zr Ratio
Session 518 - Polymer Thin Films and Interfaces II
Chair: Erin Jablonski
Vice Chair: Jianzhong Wu
518a Equilibrium Self-Assembly of Rod-Coil Block Copolymer Thin Films
518b Mixed Lamellae of Symmetric Diblock Copolymer Thin Films
518c Shear Alignment of Spherical-Phase Block Copolymer Thin Films
518d Surface Energy Effects in Triblock Copolymer Thin Films
518e Monte Carlo Simulations and Self-Consistent Mean Field Theory of Polyelectrolyte Brushes
518f Determination of Interfacial Properties of Polysiloxane-Water Systems Using Molecular Dynamics Simulations
518g Strong Charge Inversion and Layer-by-Layer Assembly of Flexible Polyelectrolytes from Self-Consistent Field Calculations
518h Study of the Molecular Weight Dependence of Surface Tension of Low Molecular Weight Alkanes by Molecular Dynamics Simulation
518i Surface Morphology and Interfacial Properties of Lubricant Nanofilms
Session 535 - Biofunctional Surfaces: From Fundamentals to Devices
Chair: Anthony M. Lowman
Vice Chair: David V. Schaffer
535a Molecular Dynamics Simulation of a Nanoscale Device for Fast Sequencing of DNA
535b A New Paradigm in Tendon Tissue Engineering
535c Real-Time Monitoring of Streptococcus Mutans Dental Biofilm Formation Using Quartz Crystal Microbalance
535d Orientational Control of Immobilized Biomolecules on a Membrane Surface for Specific Protein Capture
535e Adsorption of Dansylated Amino Acids on Molecularly Imprinted Surfaces: a Surface Plasmon Resonance Study
535f Modulation
of Astrocyte Behavior Via Transforming Growth Factor & Beta-1
Conjugated Surfaces
535g Surface Modification of Sapphire to Enhance Its Neural Biocompatibility
535h Binding of
Target DNA with Overhanging Bases to DNA Probes
in Lipid Bilayers and Micelles
Session 555 - Polymer Reaction Engineering Kinetics and Catalysis II
Chair: Sanjeev Katti
Vice Chair: U. Sundararaj
555a Polymerization Sequence and Dilution Effects on Ipn Formation
555b Reaction Engineering Aspects of a Tissue Adherent Hydrogel
555c Photoinitiation and Monomer Ordering Phenomena in Polymerizations Conducted in Lyotropic Liquid Crystalline Phases
555d Kinetic Characterization of Surface-Initiated Controlled-Radical Photopolymerizations
555e The Effect of Amines Catalyst on Benzothiazole Accelerated Sulfur Vulcanization
555f Model for
Polymer Microstructure Monitoring and Control in Solution
Polymerization of Alkyl Acrylates
555g Continuous High-Temperature Polymerization of Mma at Pilot Scale
Session 556 - Polymer Thin Films and Interfaces III
Chair: Joseph L. Lenhart
Vice Chair: Theo W. deLoos
556a Investigation
of Chemical Composition and Physical Properties of
Photopolymerized Hybrid Resin Coatings
556b Patterned Ultrathin Polymer Films Using Thiol-Ene Polymerizations
556c Low Temperature Growth of Thick Polystyrene Brushes Via Atrp
556d Atomic Transfer Radical Polymerization Synthesis of Magnetorheological Fluids
556e X-Ray
Reflectivity Study of Properties of Mixed Bis-Aminosilane-Vinyl
Triacetoxysilane Coatings
556f Chemical Vapor Deposition of Antimicrobial Polymer Coatings
556g Plasma-Induced
Graft Polymerization of Polyvinyl Acetate Nanofilms Onto
Inorganic Oxide Surfaces
556h Polybenzoxazole Films Fabricated Using Vapor Deposition Polymerization
556i Vapor-Based Polymer Coatings for Surface Engineering of Microfluidic Devices
Session 564 - Transport Phenomena in Electronic Materials Processing
Chair: Talid R. Sinno
Vice Chair: David S. Dandy
564a Chemical
Vapor Deposition Applications in Thin Film Coatings
for High-Temperature Lubrication
564b Atomic-Scale Analysis of Radical Precursor and Hydrogen Surface Diffusion on Plasma-Deposited Amorphous Silicon Thin Films
564c Effects of Elastic Stress on Electromigration-Driven Void Dynamics in Metallic Thin Films
564d Defect
Nucleation and Growth in Crystalline Silicon under
Conditions of Generalized External Stress
564e Analysis of an Industrial Electro-Dynamic Gradient Process for Czt Growth
Session 566 - Atomic Layer Deposition
Chair: Charles B Musgrave
Vice Chair: Bridget R. Rogers
566a Controlled Doping in Ultra-Thin Metal Oxide Films by Radical-Enhanced Ald
566b Atomic Layer Deposition and Film Characterization of Aluminum Oxide Grown on Si Using Tris(Diethylamino)Aluminum Precursor and Water
566c Chemical Mechanisms of Contamination in Atomic Layer Deposition of Hfo¬2
566d Tert-Butylimido-Tris(Diethylamido)Tantalum
and Nh3 Precursor
Combination for Ald of Tan for Barrier Applications
566e Area Selective Atomic Layer Deposition Using Photodefinable Polymer Masks
Session 567 - Biomaterial Scaffolds for Tissue Engineering
Chair: Christopher S. Brazel
Vice Chair: Tao L. Lowe
567a Electrospun
Degradable Segmented Polyurethane Elastomers
for Ligament Tissue Engineering
567b L-Tyrosine Based Polyurethane Blends for Tissue Engineering Applications
567c Manipulations in Hydrogel Degradation Behavior Enhance Osteoblast Function and Mineralized Tissue Formation
567d Alginate Hydrogel Mechanics Regulate Follicle Growth in a Three-Dimensional in Vitro Culture System
567e Long Term 3d Primary Hepatocyte Culture in Nano-Scaffold Hydrogel for Bioartificial Liver
567f A Microfluidic Scaffold for Tissue Engineering
567g Synthetic Scaffolds Mimicking Small Intestinal Submucosa
Session 578 - Nanostructured Biomaterials
Chair: Efrosini Kokkoli
Vice Chair: Agnes Ostafin
578a Is Silicon Suitable for Making Implantable Biomedical Devices
578b Microrheological Probes for Amphiphilic Block-Co-Polypeptide Self-Assemblies
578c Pegylated Bacteriophage for Identification of Tissue Homing Peptides
578d Albumin-Derived Nanocarriers for the Display of Extracellular Matrix Ligands & Engineering Cell Adhesion and Motility
578e Directionally Guided Actin-Based Particle Motility in Vitro
578f Nanoparticles for the Treatment of Osteoporosis
578g Layer-by-Layer
Assembly of Nacre-like Nanostructured
Composites with Antimicrobial Properties
578h Directed Calcium Deposition by Osteoblasts along Carbon Nanofiber Patterns in Polymers
Session 583 - Polymer Processing and Rheology I
Chair: Kurt W Koelling
Vice Chair: U. Sundararaj
583a In Situ Measurements of Molecular Orientation in Commercial Thermotropic Liquid Crystalline Polymers in Transient Shear Flows
583b Rheology of Carbon Nanofiber/Polystyrene and Nanoclay/Polystyrene Melt Composites
583c Transient Rheology of a Polypropylene Melt Reinforced with Long and Short Glass Fibers
583d Rheology of Homopolymer and Blends of Dense Star Polystyrene Soft Nanospheres
583e Rotational Rheometry of Polymers under High Pressure Carbon Dioxide
583f Rheostructural Study of a Discotic Thermotropic Liquid Crystalline Mesophase Pitch
583g The Performance of Multiple-Mode Models in Single and Double Step-Strain Flows
583h Orientation Number in Elongational Flow of Polymer Melts and Solutions
Session 584 - Polymers from Renewable Resources
Chair: John R. Dorgan
Vice Chair: Giuseppe R. Palmese
584a Fatty Acid Based Monomers for Fire Resistant Vinyl Ester and Unsaturated Polyester Resins
584b Epoxidation of Soybean Oil in a Microemulsion-Assisted Environment
584c The Rheology and Degradation of a Series of Pha-Based Copolymers
584d Surface Modification of Films of Pla, Pha, and Their Blends
584e Moisture Sorption and Transport in Polylactide
584f Production of Well Dispersed Polymer Blends and Nanocomposites Using Renewable Polymers with Solid-State Shear Pulverization
584g Synthesis of Poly(Butyl Acrylate)-G-Starch and Poly(Styrene)-G-Starch by Emulsion Photopolymerization to Produce Biodegradable Copolymers from Corn Starch
584h Prediction of Renewable Polymer Properties Using Quantum and Molecular Modeling
584i Synthesis of Biodegradable Poly (L-Lactic Acid): Process Path Optimization
Session 586 - Reaction Kinetics in Electronic Materials Processing
Chair: Bridget R. Rogers
Vice Chair: Katherine S. Ziemer
586a Controlling Ultrashallow Junction Formation through Surface Chemistry
586b Directed Self
Assembly of Si and Ge Nanocrystals on Hfo2 through Kinetically
Driven Patterning
586c Grain Focused Simulation of Zirconia Cvd
586d An Electrochemical Impedance Spectroscopy Study of Chloride and 3-Mercapto-1-Propanesulfonic Acid Interactions in Acidic Copper Electroplating Bath
586e Characterization of Copper Chemical Mechanical Polishing in Nitric Acid Slurries
586f Decomposition Kinetics of Diethylzinc by Quantum Chemical Calculations
586g First Principle Calculations of the Decomposition of N-Imido Tungsten Nitride Precursors
Session 590 - Structure and Properties of Polymers IV: Effects of Polymer Architecture
Chair: Sachin Velankar
Vice Chair: Clifford L. Henderson
590a Influence of Branching Distribution on the Physical Properties of High-Density Polyethylene
590b An Alternative Method for Calibrating a Size-Exclusion Chromatograph (Sec) to Measure the Molar Mass Distribution of Polyethylenes
590c Understanding the Structure Development in Hyperbranched Polymers: Comparison of Simulations and Experimental Results
590d The Effect of
Chain Architecture on Polyolefin Dynamics: Quasielastic
Neutron Scattering and Simulation
590e Determining Branch Content in Polymers: a Novel Technique Combining Small Angle Scattering and Fractal Geometry
590f Study of Ziegler-Natta and Single-Site Linear Low-Density Polyethylene by Fuming Nitric Acid Etching, Gpc and 13C Solid-State NMR
Session 594 - Biomimetic Interfaces
Chair: Vadim V. Guliants
Vice Chair: Ilsoon Lee
594a Fibronectin/Polyelectrolyte
Multilayer Assemblies: Film Formation
and Cell Attachment Studies
594b Biomimetic Interfaces for Characterizing Membrane Proteins
594c Inorganic-Organic Composite Membrane Structure for Selective Ion Transport
594d Biomimetic Interfaces Using Cell-Specific, Phage-Display-Selected Peptides
594e Biodegradable
Covalently-Linked Laminin Peptide Gradients for
Promotion and Assay of Cell Migration
594f Lipopeptide Ligands Presented in a Hybrid Bilayer Membrane Activate Cell Signaling and Support Hematopoietic Cell Growth
594g Design of Novel Biomimetic Peptide-Amphiphiles for Functional Biomaterials
594h Quantitative
Adhesion Requirements for Intracellular Signaling, Cell
Spreading and Cell Proliferation
594i In Vitro Investigations of Interactions between Amyloid Beta Peptides (1-40, 1-42) Structures and Substrates with Different Natures
Session 595 - Biosensors
Chair: David W. Schmidtke
Vice Chair: Ravindra S Kane
595a Development and Characterization of Antibody Molecules on Peg Tethered Silicon-Based Biosensors by Atomic Force Microscopy
595b Biomimetic Surfaces for the Detection of Β-Amyloid
595c Electrochemical Biosensor Platform Based on Nanofibrous Carbonaceous Supports
595d Electrochemical Glucose Biosensor for Diabetes Management
595e Near Infrared Optical Biosensors Based on Single Walled Carbon Nanotubes
595f Fabrication of Antibody Microarray Sensors Using Thermally Responsive Elastin-Protein a Fusion for Detection of Microbial Pathogens
595g Photopolymerization
for Signal Amplification in the Detection of
Biomolecular Recognition Events
595h Development
and Optimization of a Lab-on-a-Chip Device for Multiplexed
Ultra-Sensitive Detection of Proteins
595i Biomems ELISA for Rapid Assessment of Markers in Serum
Session 598 - Cure and Degradation of Thermosetting Polymer Systems
Chair: Linda Broadbelt
Vice Chair: Giuseppe R. Palmese
598a Quaternary Ammonium Surfactant Effects on Polymerization Rates in Clay-Polymer Nanocomposite Systems
598b Kinetic Modeling of the Effect of Structural Heterogeneities on Polymer Degradation
598c Effect of Cations on the Modulus of Immersed Nafion® Film by Dma
598d Thermoset Curing Schedule and Its Affect on the Final Properties
598e Cure and Hydrolysis of Cyanate Ester Systems
598f Cure Kinetics of Cross-Linked Copolymers of Dgeba Vinyl Ester and 2-Acrylamido 2-Methyl Propane Sulfonic Acid
Session 602 - High Temperature Synthesis and Processing of Ceramics
Chair: Jan A. Puszynski
Vice Chair: Jorge E. Gatica
602a Characterization of Novel Polymer Assisted Thick Ta2o5 for High Temperature Application
602b Advanced Ceramic Materials for High Temperature Coal Combustion
602c Impurity Incoporation during the Sublimation Growth of Aluminum Nitride Crystals
602d Improved
Estimates of High Temperature Fiber Bed Effective Emissivities
from Variational Calculations
602e Novel Combustion Synthesis of Advanced Oxide Ceramics
602f Kinetics and
Product Composition of Exothermic Reacting Systems
Consisting of Binary Nanopowders
Session 607 - Polymer Processing and Rheology II
Chair: Raj K. Krishnaswamy
Vice Chair: Victor Breedveld
607a Experimental Investigation of Film Formation: Film Casting
607b The Role of Shear and Extensional Rheology in Film Casting
607c Morphology
and Properties of Blown Films Prepared from
Ionomer-Organoclay Nanocomposites
607d Polymer Blends Processed by Solid-State Shear Pulverization: Compatibilization by Block Copolymer Addition and Basic Studies of Dispersed-Phase Morphology
607e Evolution of
Crystalline Morphology in Poly(Trimethylene Terephthalate)
and Ptt-Based Blends
607f Analysis of Ductile and Brittle Failures from Creep Rupture Testing o